Graphical remote control unit (grc), Operation of remote control unit, P.mode – Kenwood D-S300 User Manual
Page 10: Remote control unit rc-s0504, Mode, Pgm mode p.mode
D-S300 (En)
1 0
Confirm
Set Up
Return
Input
Source
Main Menu
TapeA
TapeB
Tape1
LD
Tuner
CD
VCR2
VCR1
TV
Sat.
Cable
CD
Track 00
10key
Pad
Mode
REMOTE CONTROL UNIT
ON /STANDBY
MUTING
VOLUME
ENTER
Graphical Remote Control Unit (GRC)
This instruction manual for this model also covers the systems in the KENWOOD System “SERIES 21” lineup. Since the features
vary depending on the combined systems, the remote control operation illustrations (icons) are shown for two types of remote
control units.
To avoid a confusing and difficult-to-follow explanation of the graphical remote control unit, a simplified explanation is
provided using the operating instructions for a general remote control unit. Please reread the operating instructions while
referring to the main differences below.
Operations with the general remote control unit are indicated by
RC operation
.
Operations with the graphical remote control unit are indicated by
GRC operation
.
Operation of remote control unit
6
P.MODE
*2
REMOTE CONTROL UNIT
RC-S0504
*1
RC operation
GRC operation
Text replacement or actual operation
Key
Icon
Press
Select
Select and press the
ENTER key.
Press the ** key
Select the ** icon
Select the ** icon and press the
ENTER key.
Use
ENTER
to select
and press the
ENTER
key.
Use
ENTER
to select
Mode
and press the
ENTER
key.
Use
ENTER
to select
PGM
and press the
ENTER
key.
Use
ENTER
to select
P.mode
and press the
ENTER
key.
*1: Icons with shading are input when the
ENTER key is pressed.
*2: Icons without shading send you to another menu screen (level) for the next operation. At the new
menu screen, you can select the desired icon.
*3: To return to the previous menu screen (level), select the
Return icon, and press the ENTER key.
PGM
Mode
P.mode
ENTER
ENTER
ENTER
Return
ENTER
*3
ENTER