Konica Minolta Konica LEXIO115 - Manual (Page 27)

53
3. Press the adjust button to change
the blinking item.
• Data continues changing as long as the
button is held down.
• The date and time must be reset each time the batteries are replaced .
5. Press the select button until all items stop blinking to set the
updated information.
• The set date appears on the data panel and disappears after 5 seconds.
52
1. Press the main switch to turn the
camera off, then press the date
button to display the date.
2. Press the select button until the
item you want to adjust blinks.
• The next item will blink each time the
select button is pressed.
stops
blinking
SETTING THE DATE OR TIME
This camera has a quartz clock and automatic calendar through the year 2029.
FOR OWNERS OF THE QUARTZ-DATE MODEL
YEAR MONTH DATE
HOURS MINUTES
4. Repeat steps 2 and 3 until all items on the date and time display
are correct.