Cleaning, Troubleshooting, Disposal – Kompernass KH 1803 User Manual

Page 14: Technical data

Advertising
background image

- 12 -

Cleaning

ƽ

Danger of electrical shock

ALWAYS remove the plug from the power socket
before cleaning the hair dryer.

Cleaning the housing

To clean the housing, use a soft cloth moistened
with a mild soapy solution.

Cleaning the air suction grill

ƽ

Risk of Fire!

Clean the air suction grill

w

at regular intervals

with a soft brush.

Press the air suction grill

w

together, from above

and below, so that you can release it from the
hair dryer.

Clean the openings of the air suction grill

w

with a soft brush.

Insert the upper securing lug of the air suction
grill

w

into the guide on the hair dryer. Then

press the lower securing lug into the hair dryer
until the air suction grill

w

audibly engages.

ƽ

Danger of an electrical shock!

After being cleaned, the hair dryer must be com-
pletely dry before using it again.

Troubleshooting

Should your hair dryer not function as expected,

first remove the plug from the wall socket and allow
the appliance to cool down for a few minutes.
The appliance is fitted with an overheating protector!
Should the appliance still not function, consult the
service department detailed on the Warranty card.

Disposal

Do not dispose of the appliance in your
normal domestic waste.

Dispose of the appliance through an approved
disposal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.

Dispose of the packaging materials in an

environmentally responsible manner.

Technical data

Mains voltage:

220-240 V~ 50 Hz

Nominal power:

2200 W

Protection class:

II /

IB_KH1803_E2452_LB5 22.02.2008 12:38 Uhr Seite 12

Advertising