KTI Networks KCD-400 Series - Manual (Page 6)

-6-
1.1 Features
• Gigabit copper to fiber conversion: 1000Base-T-to-1000Base-SX/LX
over multimode or single-mode fiber
• SFP design : For flexibility, an SFP (Mini-GBIC) connector is
provided for the fiber port to accommodate any type of SFP fiber
transceiver when needed.
• Support full wire speed copper to fiber conversion
• Auto MDI/MDI-X detection function on the copper port
• Auto-negotiation support
• Plug and play : no configuration settings is required
• Link Fault Pass Through : this function allows link fault status
passes through between copper link and fiber link transparently.
• Far End Fault function on fiber port
• Transparent conversion to any type of packet frame
• No packet length limitation
• Diversified mounting support : desktop mounting, wall mounting,
optional Din-Rail support
• Low power consumption
• Two power interface type: screw terminal block and DC jack
• Wide operating voltage input range : +7 ~ 30VDC
• Support DIN rail mounting
• Support panel mounting
• High and wide operating temperature range : -20 o C to 70 o C
• Industrial-rated Emission and Immunity performance