Kenwood KDC-MP6039 - Manual (Page 6)

6 | KDC-MP6539U/ KDC-MP6039
Category Item Setting Entry Setting overview Condition Page
MENU “Security Set” 1 sec. Sets security code 13
“SRC Select” “1”*/ “2” Sets the source selection method. 21
“iPod Mode”* 1 “OFF”/ “ON”* When set to “ON”, allows you to select music in the manner
similar to that of the iPod. 11
“AT COL CHG”* 1 “OFF”/ “iPod”* When the iPod source is used, sets whether the illumination
color is changed by the iPod. 21
“Beep” “OFF”/ “ON”* Setting the operation check sound (beep sound) ON/OFF.
“Clock Adjust” 1 sec. Sets the clock. 14
“Date Adjust” 1 sec. Sets the date. 14
“Date Mode” 7 types 1 sec. Sets the date display mode.
“Display” “OFF”/ “ON”* Turns off the display when no operation is performed. — 21
“Dimmer” “OFF”/ “ON”* Dims the display part in conjunction with the light switch of
the vehicle.
“ILM Dimmer” “AUTO”*/ “MNAL1”/
“MNAL2”* 2 / “OFF”
Sets whether the key illumination is dimmed in conjunction
with the light switch of the vehicle or it is dimmed constantly. 21
“ILM Effect” “OFF”/ “ON”* Sets whether the key illumination color* 1 /brightness* 2
is changed in conjunction with the key operation. (* 1 To
connect the Bluetooth unit)
“ILM MSC
SYNC” “OFF”*/ “ON” Sets whether the key illumination color* 1 /brightness* 2 is
changed in conjunction with the sound volume.
—
“AMP” “OFF”/ “ON”* Turns on/off the built-in amplifier. 21
“Zone2” “Rear”*/ “Front” Specifies the destination of AUX input sound when the Dual
Zone function is turned on. 21
“Supreme” “OFF”/ “ON”* Turns ON/OFF the Supreme function. 21
“CRSC” “OFF”/ “ON”* Switches to Monaural to decrease noise when reception is
poor.
“Name Set” 1 sec. Sets the station name (SNPS)/ disc name (DNPS)/ AUX name. 10
“Chinese”* 1 “OFF”*/ “ON” Selects Chinese as the display language. 21
“Scroll” “Auto”*/ “Manual” Specifies whether the text is scrolled automatically. —
“Built in AUX” “OFF”*/ “ON” Sets whether to display AUX during source selection.
“CD Read” “1”*/ “2” Sets the CD read mode. 21
“Audio Preset” 1 sec. Presets the setting value of the audio control. The preset
value is retained after resetting. 16, 17
“DEMO Mode” “OFF”/ “ON”* 2 sec. Specifies whether to enable demonstration. — 14
DISP > TYPE A/ B/ C/ D/ E/ F/ G Sets the display pattern. — 8
> GRAPH Spectrum Analyzer 1 – 2 Sets the Type E spectrum analyzer display. ‰
> SIDE Text icon/ Source
icon Sets the Type A side icon display. Å
> TEXT Sets the text display. ÅıÇÎ
Ï
8
K-COL* 1 Sets the button illumination color. 9
P.MEM Presets a station. 12, 18
SCAN “ON”/ — When set to “ON”, plays the intro of the music in the folder
successively.
RDM “ON”/ — When set to “ON”, plays the music in the folder randomly.
FiREP “ON”/ — When set to “ON”, plays the music repeatedly.
FoREP “ON”/ — When set to “ON”, plays the music in the folder repeatedly.
SCAN “ON”/ — When set to “ON”, plays the intro of the music on the disc
successively.
RDM “ON”/ — When set to “ON”, plays the music on the disc randomly.
Function Control
Functions in the table below can be set up by using Function Control.