Kohler Purist Effervescent Bath K1191-LC - Manual (Page 10)

Test Run the Bath (cont.)
Verify that the chromatherapy lights are operating. Upon start-up the lights should be changing through
the color sequence. Press the light control switch (located directly across the bath from the power switch).
The lights should stop sequencing and stay one color. Press the light control switch again and lights will
deactivate.
Check the harness connections for leakage one more time.
Press the
″
On/Off
″
control switch again to turn off the unit. The switch will also turn off.
NOTE: For additional information on operation of your overflowing bath, see “Using Your Bath” section.
1012493-2-A 10 Kohler Co.