Kaidan TM-400 - Manual (Page 12)

Page - 12
36" Turntable
18" Turntable
Flat Washer (8)
Wing Nut (4)
IN ORDER TO USE THE 36" TURNTABLE, IT MUST BE BOLTED TO THE 18"
TURNTABLE AS SHOWN ABOVE IN FOUR PLACES, USING THE (4)3/8-16 X 2.25
LG. HEX BOLT, (8)3/8" SAE WASHERS AND (4) 3/8" WING NUTS.
36" TURNTABLE ASSEMBLY INSTRUCTIONS
3/8-16x2.25lg.
hex bolt