Kenwood DDX8046BT User Manual
Page 94
94
DNX series DNX9960/ DNX7160/ DNX7020EX
Setup Menu
Speaker Setup
Speaker Setup
You can select a speaker type and its size
to get the best sound effects.
1
Display the Speaker Select screen
Touch [
]
>
>
[
]
>
>
[Audio SETUP]
>
>
[Speaker Select]. (page 78)
2
Select a speaker you wish to adjust
When the speaker type and size are
set, the speaker crossover network and
equalizer curve are set automatically.
2
2
2
1
1
1
3
3
3
4
4
4
1 Center speaker (DNX9/ DDX8 series)
2 Front speaker
3 Rear speaker
4 Subwoofer
[Tweeter] You can set the tweeter when
you are selecting front speakers.
If you are using a tweeter together with
the front speakers, set the tweeter to
"ON". In the "ON" position, the Equalizer
is adjusted to its best position.
[X'over] Displays the Speaker Crossover
Setup screen.
You can adjust the crossover setup
that was set automatically when you
selected the speaker type.
3
Select a speaker type
You can select any of the following
speaker types.
"Center" None, 2-3/4x1-9/16 inch, 2 inch,
4 inch, 5 inch, 6-1/2 inch over
"Front" OEM, 4 inch, 5 inch, 6-1/2 inch,
6-3/4 inch, 7 inch, 4x6, 5x7, 6x8, 6x9,
7x10
"Rear" None, OEM, 4 inch, 5 inch, 6-1/2
inch, 6-3/4 inch, 7 inch, 4x6, 5x7, 6x8,
6x9, 7x10
"Subwoofer" None, 6 1/2 inch, 8 inch, 10
inch, 12 inch, 15 inch over
⁄
• Select "None" if you have no speakers.
• If you set the center speaker to "None" even in
a short time when you are setting the Surround
Control to "Bypass+Center", the Surround Control
is set to "Bypass" automatically. See <Surround
Control> (page 77).
• If you set the center and rear speakers to "None"
when you are setting the Surround Control
to "Dolby PL II", the Surround Control is set to
"Bypass" automatically. See <Surround Control>
(page 77).
Crossover Network Setup
You can set a crossover frequency of
speakers.
1
Select the speaker to set the
crossover
2
2
2
1
1
1
3
3
3
4
4
4
1 Sets the High Pass Filter of the center
speaker. (DNX9/ DDX8 series)
2 Sets the High Pass Filter of the front
speaker.
3 Sets the High Pass Filter of the rear
speaker.
4 Sets the Low Pass Filter of the
subwoofer.