Care and maintenance – Kodak Zx1 User Manual
Page 19
Appendix
www.kodak.com/go/zx1support
19
■
Do not disassemble, install backward, or expose batteries to liquid, moisture, fire, or
extreme temperature.
■
Remove the batteries when the product is stored. In the unlikely event that battery
fluid leaks inside the product, contact Kodak customer support.
■
In the unlikely event that battery fluid leaks onto your skin, wash immediately with
water and contact your local health provider. For additional health-related
information, contact your local Kodak customer support.
■
Dispose of batteries according to local and national regulations. Visit
■
Do not charge non-rechargeable batteries.
For more information on batteries, se
.
Care and maintenance
■
If you suspect water has gotten inside the camera, remove the battery and card.
Allow all components to air-dry for at least 24 hours before using the camera.
■
Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.
■
Service agreements may be available in your country. Contact a dealer of KODAK
Products for more information.
■
For camera disposal or recycling information, contact your local authorities. In the
urg_01071.book Page 19 Thursday, June 18, 2009 12:26 PM