Setting service, Qcp 820 phone, From standby mode, select “features – Kyocera QCP 2700 User Manual
Page 18: Scroll and select “network, Scroll and select “set system, Qcp 1920 phone, Scroll and select “no roaming” if desired, Scroll and select “set service, Qcp 820 phone 10 qcp 1920 phone 10
[10]
5.
Turn the dial-shuttle until you see the language you want to use, then press the
dial-shuttle.
Use the menu option “Set System” or “Set Service” to prevent your phone from making or
receiving calls outside your service area. The same menu lets you control whether your dual-band
phone operates in digital or analog mode.
On the QCP 820 phone, you can limit operation to analog mode using the “Force Call” setting
(see page 25).
QCP 820 phone
1.
From standby mode, select “Features.”
2.
Scroll and select “Network.”
3.
Scroll and select “Set System.”
4.
Turn the dial-shuttle to scroll through the options, then press the dial-shuttle to select
an option. Available options are:
• AUTOMATIC. This is typically the default setting, which allows the phone to search
for and acquire the preferred service.
• no roaming. This option prevents your phone from making or receiving calls outside
your home location.
• A side only or B side only. These options refer to the two cellular blocks. By
selecting one block, you prevent your phone from operating on the other block.
QCP 1920 phone
1.
From standby mode, select “Features.”
2.
Scroll and select “Network.”
3.
Scroll and select “Set Service.” The default setting is “AUTOMATIC.”
4.
Scroll and select “no roaming” if desired.
5.
From standby mode, select “Features.”
6.
Scroll and select “Network.”
7.
Scroll and select “Set Service.”
• AUTOMATIC. This is the default setting, which allows the phone to operate while
roaming. It searches for digital service first, then analog service. Scroll to view the
other options and select by pressing the dial-shuttle.
• no roaming. The phone cannot send or receive calls outside its regular service area.
SETTING SERVICE