Kyocera QCP 2700 - Manual (Page 21)

[13]
There are several ways to find numbers in the phone book. This section assumes you’re at the
standby status display and not on a call. (You can go to standby by pressing
, or the phone
book can be retrieved during a call through the “Features” menu.)
Retrieving all memory locations
1. Turn the dial-shuttle up or down one click to access the “SAVED #S” screen.
2. Turn it down one more click to access “Phone Book.”
3. Scroll through the entries, one entry at a time. The location number of each entry is
displayed in the upper left corner of the screen (L01, L02, etc.).
4. Select “Options” to see more information. Press to place a call to that number.
Retrieving one entry by memory
Location number
1. Enter one or two digits corresponding to the location number where the phone book
memory is stored.
2. Select “Options.”
3. Scroll and select “RECALL LOC #.”
Retrieving by name search
1. Turn the dial-shuttle to the “SAVED #S” screen.
2. Select “Find Name.”
3. Enter a sequence of identifying letters. At least two letters are recommended for a
quick search (such as "wh" for “what’s-his-name”).
4. Select “Find.”
5. Scroll to the desired entry in the list provided.
6. Select “Options” to see more information on that number or press to call.
Retrieving by part of phone number search
You can look for a phone number if you know at least three of the digits.
1. Enter any three consecutive digits from the phone number.
2. Select “Options.”
3. Scroll and select “Find Number.”
4. Any matches will appear. If there are multiple matches, scroll to the desired entry.
RETRIEVING NUMBERS FROM PHONE BOOK