Kyocera QCP 2700 - Manual (Page 23)

You can make a call using any phone book memory location either by speed dialing, one-touch
dialing, or by pressing
while viewing the memory location.
Speed dialing
You can quickly dial numbers that are saved in your phone’s phone book with just a couple of key
presses.
1. Press the key(s) that correspond to the numeric memory location. For example, for
memory location 10, press .
2. Press . The phone will find the telephone number in its phone book, display it on
the screen, and then dial it.
One/two-touch dialing
One/two-touch dialing enables you to dial phone book entries through one key press (for
locations 1 to 9) or two key presses (for locations 10 to 99).
You can activate one-touch dialing through the “Touch Dial” item via “Extras” under the long
“Features” menu (page 20).
FOR MEMORY LOCATIONS 1 TO 9:
• Press and hold the appropriate key for 1.5 seconds. The display will confirm that the
number has been dialed when it shows “CALLING...”
FOR LOCATIONS 10 TO 99:
1. Press the first digit.
2. Press and hold the second digit for 1.5 seconds.
Dialing from a memory list
1. Turn the dial-shuttle to the “SAVED #S” screen.
2. Turn it another click to enter the phone book.
3. Scroll and select the phone book memory you want.
4. Press or press the dial-shuttle twice.
Dialing from a phone book memory location
While viewing any memory location, press or press the dial-shuttle twice.
DIALING NUMBERS FROM YOUR PHONE BOOK