Kenwood TK-3140 - Manual (Page 2)

ADS#11908 Printed in USA
JQA-QMA1205
All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete list of all accessories and options.
Model TK-2140 TK-3140
GENERAL
Frequency Range
Type 1 136 ~ 174 MHz 450 ~ 490 MHz
Type 2 470 ~ 512 MHz
Type 3 400 ~ 430 MHz
Systems (Trunked mode) Max. 32
Group (Trunked mode) Max. 250
Channels
Trunked/Conventional format Max. 600/Max. 250
Channel Spacing
Wide/Narrow 25, 30 kHz/12.5, 15 kHz 25 kHz/12.5 kHz
Channel Step 2.5, 5, 6.25, 7.5 kHz 5, 6.25 kHz
Operating Voltage 7.5 V DC ± 20 %
Battery Life (5-5-90 duty cycle, during hi-power, battery saver off)
with KNB-25A (1200mAh) Approx. 8 hours
with KNB-26N (2000mAh) Approx. 12 hours
with KNB-35L (1950mAh) Approx. 11 hours
Operating Temperature Range* -22° F ~ +140° F (-30° C ~ +60° C)
Frequency Stability ±0.00025% (-22° F ~ +140° F)
Antenna Impedance 50 Ω
Channel Frequency Spread
Type 1 38 MHz 40 MHz
Type 2 42 MHz
Type 3 30 MHz
Dimensions (W x H x D), Projections not included
Radio only 2-7/32 x 4-1/8 x 7/8 in. (56 x 105 x 21.9 mm)
with KNB-35L 2-7/32 x 4-1/8 x 1-5/32 in. (56 x 105 x 29.5 mm)
with KNB-25A 2-7/32 x 4-1/8 x 1-3/8 in. (56 x 105 x 35.7 mm)
with KNB-26N 2-7/32 x 4-1/8 x 1-3/8 in. (56 x 105 x 35.7 mm)
Model TK-2140 TK-3140
GENERAL Continued
Weight (net)
Radio only 5.99 oz. (170 g )antenna and belt hook
with KNB-35L 10.58 oz. (300 g )antenna and belt hook
with KNB-25A 12.7 oz. (360 g )antenna and belt hook
with KNB-26N 14.46 oz. (410 g )antenna and belt hook
FCC ID
Type 1 ALH32253110 ALH32263110
Type 1 ALH32263120 ALH32263120
Type 1 ALH32263130 ALH32263130
IC Certification 282196842A 282196837A
RECEIVER (Measurements made per EIA/TIA-204-D)
Sensitivity (12 dB SINAD)
Wide/Narrow 0.25µV/0.28µV
Selectivity
Wide/Narrow 70 dB/65 dB 70 dB/65 dB
Intermodulation Distortion
Wide/Narrow 70 dB/65 dB 70 dB/62 dB
Spurious Response 70 dB
Audio Output 500 mW with less than 5% distortion
TRANSMITTER (Measurements made per EIA/TIA-603)
RF Power Output
HI/LO 5 W/1 W 4 W/1 W
Spurious Response 70 dB
Modulation
Wide/Narrow 16KØF3E/11KØF3E
FM Noise
Wide/Narrow 45 dB/40 dB
Audio Distortion Less than 3%
*+14°F ~ +140°F (-10°C ~ +60°C) when KNB-26N/35L in use
Options
Specifications
Applicable MIL-STD & IP
footnotes from Front:
1 Conventional Systems: 250 Channels; Trunked Systems: 600
repeater cCH.s max.; 250 GID max. per system/per radio
2 DTMF includes PTT ID, Emergency ANI, Auto-Dial (32 numbers) &
Stun (a.k.a. "deadbeat disable")
3 KPG-74D required: Windows ® 98/ NT/ 2000/ Me/XP compatible;
English screen language only.
4 Two-Tone Decode (3 sets x 2 pairs each); Operator Selectable
Tone (16 QT/DQT code pairs)
5 Kenwood LTR Features include: GID Delete/Add, LTR Talk Around/Scan
Revert Group Display, System Scan, Group Scan, Auto Search.
6 Short Text Messages are radio stored & LCD displayed.
Kenwood follows a policy of continuous advancement in development.
For this reason specifications may be changed without notice.
FleetSync ® is a registered trademark of Kenwood Corporation.
LTR ® is a registered trademark of Transcrypt International.
All other trademarks are property of their respective owners.
■ KNB-25A
Ni-Cd Battery Pack
(1,200mAh)
■ KNB-26N
Ni-MH Battery Pack
(2,000mAh)
■ KNB-35L
Li-ion Battery Pack
(7.4V/1950mAh)
■ KNB-40LC
Li-ion Battery Pack
(7.4V/1950mAh) I.S.
■ KBP-5
Battery Case
■ KSC-25
Rapid Charger
■ KSC-30
Charger for KNB-25A
and KNB-26N
■ KRA-22
VHF Low Profile
Helical Antenna
■ KRA-23
UHF Low Profile
Helical Antenna
■ KRA-26
VHF Helical Antenna
■ KRA-27
UHF Whip Antenna
■ KMC-25
Speaker Microphone
■ KVC-3
Rapid Rate Vehicular
Charger Adapter
(for KSC-30)
■ KVC-4
Rapid Rate Vehicular
Charger Adapter
(for KSC-25)
■ KEP-1
Heavy Duty Earphone
(Requires KMC-25)
■ KHS-11BL
2-wire Palm Mic with
Earphone
■ KHS-12BL
3-wire Lapel Mic
with Earphone (Black)
■ KHS-14
Lightweight
Single Muff Headset
■ KLH-116
Hard Leather Case
w/Swivel
■ KBH-12
Belt Clip
KNB-35L
KSC-25
KVC-3
Standard MIL 810C MIL 810D MIL 810E MIL 810F
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I
Rain 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III
Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4
Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4
Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III
Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I
Shock 516.2/Procedure I, II, V 516.3/Procedure I, IV 516.4/Procedure I, IV 516.5/Procedure I, IV
International Protection Standard
Dust & Water Protection IP54/55