Keys Fitness KF-HCL - Manual (Page 8)

STEP 3
Connect Top Frame (4) to Half Cage and Guide Rods (7) using:
 x () Bolt M1x80  x (5) Bolt M10x0
4 x (3) Washer M10  x (0) Washer 10
 x (4) Nylon Lock Nut M1
Place High Pulley Cable (34) into positions using:
5 x (14) Big Pulley 4 x (1) Nylon Lock Nut
6 x (18) Big Pulley Spacer  x (6) Bolt M10x50
10 x (0) Washer 10  x (13) Plate for Pulley
3 x (19) Bolt M10x70
Place Low Pulley Cable (35) into positions using:
4 x (14) Big Pulley 4 x (1) Nylon Lock Nut
1 x (18) Pulley Bracket  x (19) Bolt M10x70
4 x (6) Bolt M10x50 8 x (0) Washer 10

NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly