Convenient functions, 1dvd 6-channel playback – Kenwood VR-505 User Manual

Page 28

Advertising
background image

28

Operations

Ambience effects

1

DVD 6-channel playback

(VR-506/517/KRF-V6050D/V5050D)

Using a DVD player or the like equipped with six (5.1) output channels and
the receiver, you can enjoy surround sound playback.
When you try to play a disc other than Dolby Digital such as DTS CD, no
sound is produced or, noise may be heard. To avoid this situation, make
sure that you connect the component to the receiver’s DVD/6ch. INPUT
jacks through a surround processor which can decode the surround
signal you wont to listen to.
Connecting a DVD player which can decode the surround signal itself is
also acceptable.

Preparations

Select “DVD/6ch” as the input source.

• If speaker system B is on when “DVD/6ch” is selected as the input

source, it switches off and speaker system A turns on automatically.

Start playback of the DVD software.

Adjust the volume.

• It is not possible to adjust the volume level or sound quality (

SET UP,

SOUND) of the channels separately when the receiver is in the DVD/
6ch mode. Adjust the volume with the controls of the DVD player.
For the powered subwoofer, you can adjust the volume of the
subwoofer using the subwoofer’s own volume control.

• Connect your DVD player to the DVD/6ch jacks of the receiver.
• Turn on all other components that will be used.
• Complete “Preparing for surround sound”.

(

3

4

Select "6ch INPT" by pressing the INPUT MODE key.

2

RC-R0615/R0617

RC-R0511

INPUT SELECTOR

DVD

INPUT MODE

Convenient functions

Adjusting the sound

You can make further adjustments to the sound while listening to playback
in the surround mode.

1 Press the SOUND key until the desired item appears in the

display.

Each time you press the button, the menu changes as follows:
Note that some items are not displayed in certain modes.

1 BASS (low frequency range sound quality adjustment)

¡

2 TREB (high frequency range sound quality adjustment)

¡

3 C (center speaker level adjustment)
4 SR (right surround speaker level adjustment)
5 SL (left surround speaker level adjustment)
6 SW (subwoofer level adjustment)
7 INPUT (input level adjustment)

)

8 NIGHT (midnight mode on/off)

2 Use the MULTI CONTROL keys to adjust the setting as desired.

• The adjustment item is displayed for approximately 8 seconds.

RC-R0511

RC-R0615/R0617

MULTI CONTROL

DIMMER

SOUND

SOUND

MULTI

CONTROL

_4942/26-31/EN

3/16/01, 3:10 PM

28

Advertising
This manual is related to the following products: