Kenwood VR-505 - Manual (Page 24)

24
Operations
Presetting radio stations manually
• Repeat steps 1, 2, 3, and 4 to store as many stations as necessary.
• If you store a station at a previously used preset, the old station will
be replaced by the new one.
Press the MEMORY key while receiving the station.
Proceed to step 3 within 5 seconds.
(If more than 5 seconds elapse, press the MEMORY key again).
Blinks for 5 seconds Lights for 5 seconds
1
2
Tune to the station you want to store.
3
4
Receiving preset stations
Enter the number of the preset station you want to receive
(up to “40”).
1
2
Press the numeric keys in the following order:
For "15", press .......... 0,5
For "20", press .......... 0,0,)
• If you make a mistake entering a two digit number, press the +10 key
repeatedly to return to the original display and start again.
Use the MULTI CONTROL keys to select one of the station
presets (1 – 40).
Press the MEMORY key again to confirm the setting.
Press TUNER to select tuner as the source.
AM
kHz
PRO LOGIC
3
DOWN MIX
DIGITAL
S.DIRECT
MONITOR
DSP
AUTO SOUND
LFE
C
S RS LS
TI.VOL B
CLIP MUTE
RDS EON PTY
TP TA NEWS
FM
MHz STEREO
AUTO
TUNED
ST.
MEMO
SW
R L SP A
AM
kHz
PRO LOGIC
3
DOWN MIX
DIGITAL
S.DIRECT
MONITOR
DSP
AUTO SOUND
LFE
C
S RS LS
TI.VOL B
CLIP MUTE
RDS EON PTY
TP TA NEWS
FM
MHz STEREO
AUTO
TUNED
ST. SW
R L SP A
Listening to radio broadcasts
Receiving preset stations in order
(P.CALL)
• Each time you press the key, another preset station is received in
order.
Pressing the P.CALL ¢ does the following:
=01=02=03= ... = ... 38=39=40
Pressing the P.CALL 4 does the following:
01 +02+03+ ... + ... 38+39+40+
Holding down the ¢ or 4 key, lets you skip through the
presets, receiving each preset station at 0.5 second intervals.
1
2
Press TUNER key to select the tuner as the source.
Use the P.CALL 4 / ¢ key to select the desired station.
MULTI CONTROL
MEMORY
RC-R0511
TUNER
RC-R0615/R0617
Numeric keys
RC-R0615/R0617 RC-R0511
TUNER
P.CALL
4/¢
_4942/23-25/EN 3/16/01, 3:09 PM 24