Kyocera Candid KX16 - Manual (Page 38)

32 Using Voice Recognition
To wake up the phone:
1. Say “ Wake Up” and listen for a tone.
2. Say “ Wake Up” again until you hear two tones.
If the phone does not recognize your “Wake up”
command, see “Training voice recognition” on
page 32.
Answering the phone
You can set the hands-free car kit to either (1)
answer automatically or (2) answer using a voice
command.
Answering automatically
You can set your phone to answer automatically.
• Select
Menu
→
Settings
→
Accessories
→
Auto-Answer
→
After 5 seconds .
Answering using voice commands
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using the
Kyocera hands-free car kit.
• Select
Menu
→
Settings
→
Accessories
→
Auto-Answer
→
Disabled .
To activate the Voice Answer setting:
1. Select Menu
→
Settings
→
Voice Features
→
Voice Answer .
2. Highlight Enabled , then press .
3. Select Menu
→
Settings
→
Silent Mode
→
Normal Sounds , then press .
To answer a call:
When you receive an incoming call, the phone
responds: “Incoming call, answer?” or “Incoming
roam call, answer?” If the caller is recognized as a
saved contact entry, then the phone says
“Incoming call from (Name), answer?”
• Say
Yes or press any key except .
Ignoring an incoming call
To ignore an incoming call, do one of
the following:
• Say
No and press to silence the alert.
• Remain silent. The voice alert repeats twice
and the phone rings once, then returns to the
home screen.
Training voice recognition
If your phone is having trouble recognizing your
voice, you can train it with the commands
Yes ,
No , and Wake up .
1. Select Menu
→
Settings
→
Voice Features .
2. Select Voice Training .
3. Read the message and press to select OK
and continue. Cancel returns you to the
previous screen.
4. Select Train All or the item you want to train.
5. Follow the prompts for each word until
training is complete.