Keys Fitness Stepper Machine E2-0 - Manual (Page 9)

9
www . keys
fitness.com
Assembly
4
D
G2
G1
E1
N8
N13
N21
N3
N13
N14
P1
N6
G1-1
G1
D
D2-1
Use Tool
6mm
Use Tool
5mm
ASSEMBLY FOR RIGHT
HANDLEBAR
Step 1:
Connect the right rotating handlebar tube
(P1) to the upright post (D) at the arm joint
and secure using allen screw (N8), spring
washer (N13) and flat washer (N21).
Step 2:
Attach the right rotating handlebar (E1) to
the right rotating handlebar tube (P1) and
secure using 4 allen screws (N3), 4 spring
washers (N13), and 4 flat washers (N14).
ASSEMBLY FOR STATIONARY
HANDLEBARS
Step 1:
Connect the pulse wire (G1-1) from the
right handlebar (G1) to the pulse wire
(D2-1) from the upright post (D).
Step 2:
Attach the right stationary handlebar
(G1) to the right handlebar mount on the
upright post (D) and secure using 3 allen
screws (N6).
Step 3:
Repeat steps 1 and 2 for the left station-
ary handlebar (G2).