Konica Minolta BIZHUP C451 - Manual (Page 356)

Various settings 9
C451 9-45
Driver Password Encryption Setting
For the encryption common key for the password that is added to a print job,
you can specify whether to use the encryption key that was specified at the
factory or change it to a user-defined encryption password. (Default setting:
User Factory Default)
-
User-Defined: Specifies the encryption password. Enter an encryption
password of 20 characters.
- Use Factory Default: Uses the default encryption password (encryption
key [common key] that is already determined and that is not disclosed)
that was specified at the factory.
2
Note
To display the Administrator Settings screen, refer to “To display the Ad-
ministrator Settings screen” on page 9-34.
Encryption can be performed with an encryption common key, however,
the passwords that can be used are the user password, account pass-
word, and the secured document password.
When specifying the encryption password with “User-Defined”, be sure
to specify “Encryption Key” in the printer driver. If the encryption pass-
word for this machine and the encryption key for the printer driver are dif-
ferent, the passwords do not match and printing cannot be performed.
When using OpenAPI, the encryption common key can be acquired from
this machine.
1
In the Administrator Settings screen, touch [Security Settings].
2
In the Security Settings screen, touch [Driver Password Encryption
Setting].
3
Touch the button for the desired setting.