Kathrein UFC 762si - Manual (Page 46)

46
CONDITIONAL ACCESS
This menu informs you which CA module is fi tted to your receiver and which Smartcard is present in the CI
slot. Select the “CryptoWorks - Common” menu using the

buttons and press the button to open
it. You will then see the menu generated by the CA module.
The screenshots below depend on the specifi c module and card, and so are only intended as
examples.
CRYPTOWORKS - COMMON (CA MODULE)
From this menu, your card and your PIN code allow you to access various channels from your Pay-TV
provider.
“CryptoWorks” has been selected as an example here. The details can be different for each CA module.
Always follow the instructions supplied by your Pay-TV provider.
Information for Conax, SECA, Viaccess and CryptoWorks users:
Note that with monthly activation intervals, the programme providers have different
procedures for activating Pay-TV cards. Activation may therefore be a few days before or
after the beginning of a new month. During this activation period, the CA module and card
must be in the slot, and the receiver must be turned on a set to the booked Pay-TV channel.
Follow the instructions from the Pay-TV provider.
If your Pay-TV card is then still not enabled, we recommend you briefl y withdraw the CA
module with the card out of the slot, with the receiver switched on, and then re-insert it.
This information has nothing to do with the properties of the receiver; it is merely
intended to assist you.
The various items can be selected using the

buttons and called up using the button. Press the

button to exit the menu.
Note: The module displays may
be shown in English,
even if you have selected
German as the menu
language, because the
menu is generated directly
by the module!