Kathrein UFC 762si - Manual (Page 48)

48
SOFTWARE UPDATE VIA INTERNET/SERVICE
SOFTWARE UPDATE VIA INTERNET
If there is a new software release for your DVB-C receiver you can download it from:
http://www.kathrein.de
under “Service/Software and Download/Receiver”
The website also provides information and tips on software updating via the receiver's RJ 11 data interface.
The required cable (RJ 11 to RS 232) can be ordered from our service centre, ESC in Grassau, at the
following address:
ESC Electronic Service
Chiemgau GmbH
Bahnhofstraße 108
83224 Grassau, Germany
Tel.: +49 8641 9545-0
Fax: +49 8641 9545-35 & 9545-36
e-mail: [email protected]
Internet: http://www.esc-kathrein.de
NOTE! Updating requires a PC and a software cable (RJ 11 to Sub-D 9-pin)!
Note: Factory settings must be restored following a successful software download.
If, despite reading this operating manual, you still have questions about getting started with the receiver or
using it correctly, or if unexpected problems occur, please contact your specialist dealer.
SERVICE