Kompernass KH 1134 - Manual (Page 6)

- 6 -
(The water does not start boiling in the keep warm
range!).
• After reaching the desired temperature, the ap-
pliance switches off the heating process. The
ON/OFF switch
e and the operating lights r
remain switched on.
Because the device is equipped with a heat
maintenance function, the device automatically
begins reheating as soon as the water tempe-
rature falls below the set temperature.
The appliance heats until the desired tempera-
ture is reached. Make sure that the appliance
does not automatically switch on to the keep
warm function. Therefore, do not leave the
appliance unsupervised!
• As soon as the kettle u is lifted from the base
t , the ON/OFF switch e jumps out and the
operating lights r switch off.
• In order to halt the heating process, push the
ON/OFF switch e up again. The operating
light r goes out then as well.
Avoid setting the temperature controller y in
the transition range, as the water can start boi-
ling on account of varying filling levels.
ƽ
Warning: Pull the power plug from the
socket before lifting the kettle
u from the
base t . This prevents any water
splashing out from contacting the electrical
connections in the base
t , which could
cause a short circuit.
For safety reasons, the lid q should not
be opened while the water is boiling or is
very hot. Otherwise there is a risk of
injury.
Cleaning and Care
ƽ
Danger!: Do not open any part of the
housing. There are no operating elements
inside. An open housing can create the risk
of a life-threatening electrical shock.
Never submerse any parts of the device in
water or other liquids! This can create the
risk of a life-threatening electrical shock if
residual liquid comes into contact with
powered components.
Before cleaning the device, ....
• First pull the power plug out of the power socket
and let the device cool completely.
• Clean the exterior surfaces and the power cord
with a slighly damp cloth. Always dry the device
well before using it again.
• Never use any cleansers, abbrasive substances
or solvents. These can damage the device.
In the event of calcium deposits
• Purchase a decalcifying agent suitable for use
with food containers from a household goods
stores (e.g. coffee machine decalcifier).
• You can use a suitable product from a
specialised dealer for the stainless steel
container bottom.
Removing / replacing the spout screen
• Open the lid q completely.
• Press down on the edge of the spout screen o
from above in order to remove it toward the
inside.
• Clean the spout screen o with a lightly
moistened wash cloth.
• After cleaning, insert the spout screen o from
above and press it firmly into place.
IB_KH1134_E30258_LB6 30.01.2009 10:36 Uhr Seite 6