Bottom, Setting up your camera, Installing the batteries – Kyocera NS-L32Q-10A User Manual

Page 8: Attaching the wrist strap, Understanding camera memory and file names

Advertising
background image

4

NS-DSC1112/NS-DSC1112P/NS-DSC1112-CN Insignia 12 Megapixel Camera

www.insigniaproducts.com

Bottom

Setting up your camera

Installing the batteries

Make sure that you read and follow the battery
cautions in “Battery information” on page 1.

To install the batteries:

1 Make sure your camera is turned off.

2 Slide the cover in the direction of the arrow,

then lift the cover away from the battery
compartment.

3 Insert two AA batteries (included) into the

battery compartment. Make sure that the +
and – symbols on the batteries align with the +
and – symbols in the battery compartment.

4 Close the battery compartment cover, then slide

the cover in the direction of the arrow to lock it
in place.

Attaching the wrist strap

To attach the wrist strap:

1 Insert the short loop on the strap through the

strap ring.

2 Thread the large loop through the short loop,

then pull tight.

Understanding camera memory and file
names

Internal memory

Your camera is equipped with 32 MB of internal
memory. Approximately 20 MB of the internal
memory is available for photo and video storage. If
no memory card is inserted in the memory card
compartment, all photos and videos captured are
automatically stored in the internal memory.

External memory

Your camera supports SD cards up to 4 GB and
SDHC cards up to 32 GB. If there is a memory card
inserted in the card slot, your camera automatically
saves all photos and videos in the memory card.
The

icon indicates your camera is using the

memory card.

File names

File names begin with “DSCI” and are followed by a
four-digit number that increases in sequence. File
numbering starts from 0001 when a new folder is
created.

#

Item

Description

Battery/SD memory card
compartment

Insert two AA batteries into this compartment. For
more information, see “Installing the batteries” on
page 4.
Insert an SD or SDHC memory card (not included) into
this compartment. For more information, see
Installing a memory card” on page 5.

Tripod socket

Use to mount the camera to a tripod.

1

2

Advertising
This manual is related to the following products: