Listening to a source component, Adjusting the sound – Kenwood KRF-V6090D User Manual

Page 19

Advertising
background image

19

EN

Listening to a source component

1

Use the INPUT SELECTOR knob or Input Selector keys to
select the source you want to listen to.

The input sources change as shown below:

1 “TUNER”
2 “CD/DVD”
3 “TAPE” or “MD”
4 “VIDEO1”
5 “VIDEO2”
6 “DVD/6CH” (VR-906/VR-905 : “DVD”)
7 “AUX”

2

Start playback from the selected source.

3

Use the VOLUME CONTROL knob or VOLUME

%

/

keys to

adjust the volume.

INPUT SELECTOR

VOLUME CONTROL

Input

Selector

VOLUME

%/

Normal playback

Adjusting the sound

Adjusting the Tone (remote control only)

You can adjust the sound quality when this model is in the PCM stereo
and analog stereo mode.

1 Press the TONE key to select the Tone mode.

2 Use the MULTI CONTROL knob or MULTI CONTROL %/ keys to

select TONE ON/OFF.

3 When in TONE ON selection, press the TONE key for the following

displays.

BASS : Select this to adjust the low frequency range.
TREB : Select this to adjust the high frequency range.

4 Use the MULTI CONTROL knob or MULTI CONTROL %/ keys to

adjust the sound quality.

• The bass and treble levels are adjustable from -10 to +10 in 2 step

increments.

One-touch low frequency emphasis (Bass Boost)
(remote control only)

You can adjust the sound quality when this model is in the PCM stereo
and analog stereo modes.

Press the BASS BOOST key.
• Press the key once to select the maximum (+10) low frequency

emphasis setting.

• TONE will automatically be turned ON.
• This key does not function when this model is in the sound quality

or ambience effects adjustment mode.

£~•

Switching back to the previous setting

Press the BASS BOOST key again.

VOLUME

%/

MUTE

BASS BOOST

MULTI
CONTROL

ACTIVE EQ

VOLUME CONTROL

PHONES

MULTI CONTROL

TONE

ACTIVE EQ

LOUDNESS

SPEAKERS ON/OFF

MUTE

04.11.25, 19:02

19

Advertising
This manual is related to the following products: