Connection, B c b c, Bc a a – Kenwood DDX8047 User Manual
Page 4
4
|
English
Connection
TV ANTENNA INPUT
TO
MONITOR UNIT
B
C
B
C
PRK SW
–
+
+
B
C
A
A
If you connect the ignition wire (red) and the battery wire
(yellow) to the car chassis (ground), you may cause a short
circuit, that in turn may start a fire. Always connect those
wires to the power source running through the fuse box.
IConnection cable (Included in the disc changer)
Antenna Cord
FM/AM antenna input
Connect to the vehicle's parking brake detection switch harness
using the supplied relay connector.
To Vehicle's reverse lamp harness
To car light control switch
Reveres sensor wire (Pink)
For the sake of safety, be sure to connect the parking sensor.
Dimmer control wire (Orange/White)
When using the optional power amplifier,
connect to its power control terminal.
To "EXT.AMP.CONT." terminal of the amplifier
having the external amp control function.
TV tuner (Optional)
Parking sensor wire (Green)
Battery wire
(Yellow)
Ground wire (Black) - (To car chassis)
( 5A )
Ignition wire (Red)
If no connections are made, do not let
the cable come out from the tab.
Steering remote control input
(Light Blue/Yellow)
To Steering remote
Connect to the terminal that is grounded when either
the telephone rings or during conversation.
Depending on what antenna you are using,
connect either to the control terminal of the
motor antenna, or to the power terminal for the
booster amplifier of the film-type antenna.
Battery wire (Yellow)
Ground wire (Black) - (To car chassis)
If no connections are made, do not let the cable come out from the tab.
Mute wire (Brown) .
Motor antenna control wire
(Blue) .
Power control wire
(Blue/White)
External amplifier control wire
(Pink/Black)
To connect the Kenwood navigation system,
consult your navigation manual.
Ignition key
switch
ACC
Car fuse
box
(Main fuse)
Battery
Car fuse box
Disc Changer etc.(Optional)