Konica Minolta IC-202 User Manual
Page 80
Advertising
Setting Up Network Printing
3
IC-202
3-11
–
Setting the Raw Printing
8
Put a check to [Raw], enter the port No. having set to the [Raw Settings]
box and click [OK].
–
Check the port No. setting in the [RAW Port Number] if required.
Refer to the “bizhub 750/600 User's Guide [Network Scanner Op-
erations]” for more information on the [RAW Port Number].
9
Click [Next] and [Finish] to complete this step.
–
Setting the LPR Printing
10
Select [LPR], enter “Print” in the [Queue Name] box, and then click the
[OK].
11
Click the [Next], and then click the [Finish] to apply the setting.
Advertising
This manual is related to the following products: