2 setting the ip address for this machine, Setting the ip address for this machine -5, Setting the ip address -5 – Konica Minolta IC-202 User Manual

Page 74

Advertising
background image

Setting Up Network Printing

3

IC-202

3-5

3.2

Setting the IP Address for This Machine

Use this machine’s control panel to assign an IP address to this machine.

2

Reminder

When specifying network settings, follow the instructions of the network
administrator.

Setting the IP Address

1

Press the [Utility/Counter] key on this machine’s control panel, touch
[Administrator Setting], and then enter the administrator password.

The administrator password is required in order to enter Adminis-
trator mode. Ask the administrator of this machine for the adminis-
trator password.

2

Touch [Network Setting], then [TCP/IP Setting].

3

Specify settings for the following:

IP Address: Set the IP address of this machine.
Subnet Mask: Set the subnet mask for the network to which you are
connecting.
Default Gateway: Set the default gateway address for the network to
which you are connecting.

4

To apply the settings, restart this machine (turn it off, then on again).

After turning OFF, wait for more than 10 seconds and turn ON the pow-
er. Then the IP address setting becomes effective.

Advertising
This manual is related to the following products: