Document Outline

• Table of Contents
• 1 Get Started
  • Phone Battery
    • Install the Battery
      • 1. Hold the phone face down.
      • 2. Find the notch directly below the back cover. It is square. Using your thumbnail, pry the cover up from the bottom to remove.
      • 3. Place the battery in the battery casing with the metal contacts facing toward the top of the phone. The metal contacts of the battery must make contact with the metal contacts of the battery casing.
      • 4. Replace the battery cover by sliding the notches into the openings on the top of the battery casing.
      • 5. Snap the cover into place.
    • Charge the Battery
      • 1. Connect the AC adapter to the microUSB jack on the side of the phone.
      • 2. Plug the adapter into a wall outlet.
    • Battery Safety Guidelines
    • Common Causes of Battery Drain
  • Phone Overview
    • Get to Know Your Phone
      • 1. Home screen.
      • 2. Volume key raises or lowers ringer volume.
      • 3. Left softkey selects items that appear on the lower left of the display. At the home screen, you can select Menu.
      • 4. Speakerphone key activates the speakerphone and answers incoming calls.
      • 5. Navigation key scrolls through lists and text entry fields and accesses the following shortcuts from the home screen.
      • 6. Send key starts or answers a call. Press once to display the All Calls list and twice to redial the last number dialed.
      • 7. Keypad for entering numbers, letters, or symbols.
      • 8. * Shift key changes the text mode in text entry. Press and hold to lock the keypad.
      • 9. Jack for a hands-free headset (sold separately).
      • 10. Jack for AC adapter (included) and microUSB cable (sold separately).
      • 11. Right softkey selects items that appear on the lower right of the display. At the home screen, you can select @metro.
      • 12. OK key selects a menu item or option. At the home screen, press the OK key to launch the icon highlighted on the application bar. Use the Navigation key to choose an icon to highlight.
      • 13. Back key erases characters in text entry and returns you to the previous screen when navigating through menus.
      • 14. End key turns the phone on and off, ends a call or browser session, and returns you to the home screen.
      • 15. # Space key enters a space during text entry. Press and hold to activate or deactivate vibrate mode.
      • 16. 0 Next key cycles through word choices during text entry.
    • MetroPCS Applications
    • Screen Icons
  • Main Menu
  • Guide Conventions
    • 1. Press the left softkey to select Menu.
    • 2. Scroll to the Settings option.
    • 3. Press the OK key to select Settings.
• 2 Call Features
  • Power Phone Up
  • Make Phone Calls
    • Call Using a Number
      • 1. Enter a phone number.
      • 2. Press the Send key.
    • Call Using a Contact
      • 1. From View All, highlight a contact.
      • 2. Press the Send key.
    • Redial a Number
      • 1. Press the Send key to open your call history.
      • 2. Highlight a phone number or contact and press the Send key.
  • Answer Phone Calls
    • Answer Using Earpiece
    • Answer Using Speakerphone
  • End Phone Calls
  • Volume Control
    • Adjust Volume during a Call
    • Use the Speakerphone
    • Silence an Incoming Call
  • Use Speed Dialing
    • 1. Enter the one- or two-digit speed dial location.
    • 2. Press the Send key.
  • Emergency Services
    • Call Emergency Services
      • 1. Enter the 3-digit emergency code.
      • 2. Press the Send key.
    • Exit Emergency Services
      • 1. Select Exit.
      • 2. Select Exit again to confirm your choice.
• 3 Text Entry
  • Text Entry Modes
    • 1. Characters remaining that you can type. Allowed message length can vary depending on your service.
    • 2. Text entry fields.
    • 3. Current capitalization setting.
    • 4. Current text entry mode.
    • Enter Numbers with Number Keypad
    • Enter Letters with Number Keypad
    • Rapid Entry with Number Keypad
    • Enter Symbols with Number Keypad
      • 1. From the text entry field, select Options > Add Symbols.
      • 2. Scroll up or down to view the list of symbols.
      • 3. Press the number key corresponding to the symbols to enter it.
  • Text Entry Quick Reference
• 4 Recent Calls
  • Recent Calls Menu
  • Work with Call Lists
    • Return Any Call
      • 1. From All, highlight a number.
      • 2. Press the Send key to call the number or select Options to access more features.
    • Return a Received Call
      • 1. From Incoming, highlight a number.
      • 2. Press the Send key to call the number or select Options to access more features.
    • Return an Outgoing Call
      • 1. From Outgoing, highlight a number.
      • 2. Press the Send key to call the number or select Options to access more features.
    • Return a Missed Call
      • 1. From Missed, highlight a number.
      • 2. Press the Send key to call the number or select Options to access more features.
    • Manage a Missed Call Alert
    • Call List Options
      • Save Number from Call List
        • 1. At a call list, highlight a number.
        • 2. Select Options > Save.
        • 3. Select Save New Contact to create a new contact or Add to Existing to add a number to an existing contact.
      • View Contact from Call List
        • 1. At a call list, highlight a contact.
        • 2. Select Options > View to see the contact details screen.
      • Send Text Message from Call List
        • 1. At a call list, highlight a contact.
        • 2. Select Options > Send Text Msg.
        • 3. Complete your text message and select Send.
      • Send Multimedia Message from Call List
        • 1. At a call list, highlight a contact.
        • 2. Select Options > Send Pic Msg.
        • 3. Complete your multimedia message and select Send.
  • Erase Call List Records
    • Erase a Single Record
      • 1. At a call list, highlight a contact.
      • 2. Select Options > Erase Record > Yes.
    • Erase a Call List
    • Erase All Call Lists
  • Work with Call Timers
    • View Outgoing Calls Timer
    • View Incoming Calls Timer
    • View All Calls Timer
    • View Outgoing Data Timer
    • View Incoming Data Timer
    • View All Data Timer
    • View Calls Life Timer
    • View Data Life Timer
  • View Data Counter
• 5 Contacts
  • Contacts Menu
  • Launch Metro411
  • Access Contacts
    • Access Contacts List
      • 1. From View All, enter the first letter of your desired contact and scroll to highlight it.
      • 2. Do one of the following:
    • View Contact Details
      • 1. From View All, select a contact.
      • 2. At the contact details screen, highlight a number, address or note.
      • 3. Select the detail you want to view. For example, to view a phone number, select Options > View Number.
    • Use Frequent List
    • Use Fast Find
  • Add Contacts
    • Add Contacts from Home Screen
      • 1. From the home screen, enter a phone number to save (include the area code).
      • 2. Select Save > Save New Contact.
      • 3. Enter a name for the contact.
      • 4. Enter additional phone numbers, email addresses, and other contact details. (Scroll up or down to move through the contact fields.)
      • 5. When done, select Save.
    • Add Contacts from Contacts Menu
      • 1. From Add New, enter a name for the contact. Scroll down to the next field when done.
      • 2. Enter a primary number for the contact.
      • 3. Enter additional phone numbers, email addresses, and other contact details. (Scroll up or down to move through the contact fields.)
      • 4. When done, select Save.
    • Add a Code or Extension
      • 1. From the home screen, enter a phone number.
      • 2. Select Options and a type of pause:
      • 3. Enter the remaining numbers and select Save > Save New Contact.
      • 4. Complete the contact information and select Save.
  • Use Contacts
    • Call Contacts
      • 1. From View All, select a contact.
      • 2. At the contact details screen, highlight a number.
      • 3. Select Options > Call.
    • Send a Text Message to Contacts
      • 1. From View All, select a contact.
      • 2. At the contact details screen, highlight a number or email address.
      • 3. Select Options > Send Text Msg.
      • 4. Complete your text message and select Send.
    • Send a Multimedia Message to Contacts
      • 1. From View All, select a contact.
      • 2. At the contact details screen, highlight a number or email address.
      • 3. Select Options > Send Pic Msg.
      • 4. Complete your multimedia message and select Send.
    • Send a Contact vCard
      • 1. From View All, select a contact.
      • 2. At the contact details screen, highlight the contact name.
      • 3. Select Options > Send as vCard > Via MMS (to attach to a multimedia message), or Via Bluetooth (to send to a Bluetooth-enabled device).
      • 4. Complete the appropriate task to send the contact information.
  • Customize Contacts
    • Edit Contact Details
      • 1. From View All, select a contact.
      • 2. At the contact details screen, select Edit.
      • 3. Enter additional phone numbers, email addresses, and other contact details. (Scroll up or down to move through the contact fields.)
      • 4. When done, select Save.
    • Assign Number Types
      • 1. From View All, select a contact.
      • 2. At the contact details screen, select Edit.
      • 3. Press down twice to scroll to the number type dropdown and press the OK key.
      • 4. Select a number type. The appropriate icon appears next to the number in your contacts list.
      • 5. Select Save.
    • Assign Ringers to Contacts
      • 1. From View All, select a contact.
      • 2. At the contact details screen, highlight the contact name.
      • 3. Select Options > Ringer > Assign Ringer and a ringer from the list. (Scroll to play the ringers.)
    • Assign Message Tones to Contacts
      • 1. From View All, select a contact.
      • 2. At the contact details screen, highlight the contact name.
      • 3. Select Options > Msg Tone > Assign Msg Tone and a ringer from the list. (Scroll to play the ringers.)
    • Assign Pictures to Contacts
      • 1. From View All, select a contact.
      • 2. At the contact details screen, highlight the contact name.
      • 3. Select Options > Picture > Assign Picture to assign a picture.
    • Add a Prefix to Phone Numbers
      • 1. From View All, select a contact.
      • 2. At the contact details screen, highlight a number.
      • 3. Select Options > Prepend to enter the prefix at the beginning of the number.
      • 4. Select Save.
    • Assign Speed Dials to Contacts
      • 1. From View All, select a contact.
      • 2. At the contact details screen, highlight a number.
      • 3. Select Options > Add Speed Dial.
      • 4. Select a location from the list to assign the speed dial number.
    • Change Primary Numbers
      • 1. From View All, select a contact.
      • 2. At the contact details screen, highlight a number.
      • 3. Select Options > Primary Number > Yes.
    • Add Contacts to Groups
      • 1. From View All, select a contact.
      • 2. At the contact details screen, highlight a number or email address.
      • 3. Select Options > Add To Group.
      • 4. Select groups from the list provided. A checkmark appears next to each selection. You can also remove a checkmark.
      • 5. When finished, select Done.
    • Visit Web Addresses
      • 1. From View All, select a contact.
      • 2. At the contact details screen, highlight a Web address.
      • 3. Select Options > Launch Web.
  • Erase Contacts
    • Erase Contact Details
      • 1. From View All, select a contact.
      • 2. At the contact details screen, highlight a number, address or note.
      • 3. Select your desired erase option and then select Yes. For example, to erase an email address, select Options > Erase Address > Yes.
    • Erase an Entire Contact
      • 1. From View All, select a contact.
      • 2. At the contact details screen, highlight the contact name.
      • 3. Select Options > Erase Contact > Yes to erase the entire contact.
    • Erase All Contacts
    • Erase All Contacts and Groups
  • Contact Groups
    • View Groups
      • 1. Select Groups to view your preloaded groups, followed by the custom groups you have created.
      • 2. Highlight a group and do one of the following:
    • Create a New Group
      • 1. From Groups, select New.
      • 2. Enter a name for the group and select Next.
      • 3. Select contacts from the list provided. A checkmark appears next to each selection. You can also remove checkmarks.
      • 4. When finished, select Done.
    • Send Text Messages to Groups
      • 1. From Groups, highlight a group.
      • 2. Select Options > Send Text Msg.
      • 3. Complete your text message and select Send.
    • Send Multimedia Messages to Groups
      • 1. From Groups list, highlight a group.
      • 2. Select Options > Send Pic Msg.
      • 3. Complete your multimedia message and select Send.
    • Add or Remove Contacts from Groups
      • 1. From Groups, highlight a group.
      • 2. Select Options > Edit.
      • 3. If you are modifying a group you created, select Next. Otherwise, go to the next step.
      • 4. Select contacts from the list provided. A checkmark appears next to each contact in the group. Press the OK key to add or remove checkmarks.
      • 5. When finished, select Done.
    • Assign Ringers to Groups
      • 1. From Groups, select a group.
      • 2. At the group details screen, scroll to the group name.
      • 3. Select Options > Ringer > Assign Ringer and a ringer from the list. (Scroll to play the ringers.)
    • Assign Message Tones to Groups
      • 1. From Groups, select a group.
      • 2. At the group details screen, scroll to the group name.
      • 3. Select Options > Msg Tone > Assign Msg Tone and a ringer from the list. (Scroll to play the ringers.)
    • Assign Pictures to Groups
      • 1. From Groups, select a group you have created.
      • 2. At the group details screen, scroll to the group name.
      • 3. Select Options > Picture > Assign Picture to assign a picture.
    • Send a Group vCard
      • 1. At the Groups list, highlight a group.
      • 2. Select Options > Send > Via Bluetooth.
      • 3. Complete the appropriate task to send the group information.
    • Create a Message Group
      • 1. From Groups, highlight a group.
      • 2. Select Options > Create Msg Group.
      • 3. Modify the name for the group and select Next.
      • 4. Select contacts from the list provided. A checkmark appears next to each contact in the group. Press the OK key to add or remove checkmarks.
      • 5. When finished, select Done.
    • Erase a Group
      • 1. From Groups, highlight a group.
      • 2. Select Options > Erase > Yes.
    • Erase All Groups
  • Speed Dial List
    • Assign Speed Dial Numbers
      • 1. From Speed Dial List, highlight an unassigned number (marked as empty).
      • 2. Select Assign.
      • 3. At the contacts list, select a contact.
      • 4. At the contact details screen, select a phone number.
    • Clear Speed Dial Numbers
      • 1. From Speed Dial List, highlight an assigned number.
      • 2. Select Erase > Yes.
  • Check Contacts
• 6 Messaging
  • Messaging Menu
  • Send Email
  • Send Instant Messages
  • Send Messages
    • Create a Text Message
      • 1. From New Text Msg, enter a recipient’s phone number or email address. (Select Options to access contacts, groups or recently used addresses. Scroll down to move to the next field when done.)
      • 2. Enter the message. (Select Options to access more features.)
      • 3. When done, select Send.
    • Create a Multimedia Message
      • 1. From New Pic Msg, enter a recipient’s phone number or email address. (Select Options to access contacts, groups or recently used addresses. Scroll down to move to the next field when done.)
      • 2. Repeat the first step for CC and BCC, if needed.
      • 3. Enter a subject.
      • 4. Enter a message.
      • 5. Attach an image file. (Select Options to access more features.)
      • 6. Attach a sound file. (Select Options to access more features.)
      • 7. When done, select Send.
    • Receive Calls while Creating Messages
    • Enter Message Recipients
      • Add Recipients from Contacts
        • 1. At the compose message screen, select Options > Contacts when entering a phone number or email address.
        • 2. Select a contact from the contacts list.
        • 3. Select a number or address.
        • 4. Complete your message.
      • Add Recipients from Recent List
        • 1. At the compose message screen, select Options > Recent List when entering a phone number or email address.
        • 2. Select a number or address.
        • 3. Complete your message.
      • Add Recipients from Recent Calls
        • 1. At the compose message screen, select Options > Recent Calls when entering a phone number or email address.
        • 2. Select a number.
        • 3. Complete your message.
      • Send to Groups
        • 1. At the compose message screen, select Options > Message Groups when entering a phone number or email address.
        • 2. Select a group.
        • 3. Complete your message.
      • Save Recipients as Contacts
        • 1. At the compose message screen, select Options > Save Address when entering a phone number or email address.
        • 2. Select a number or address.
        • 3. Select Options > Save New Contact (to create a new contact) or Options > Add to Contact (to add the number or address to an existing contact).
      • Add Recipients from Message Text
        • 1. At the compose message screen, select Options > Add Address when entering the text to add more recipients.
        • 2. Enter a number or address to add.
        • 3. Complete your message.
    • Save Messages to Drafts
    • Complete Messages in Drafts
    • Use Preset Text
      • Add Preset Text
        • 1. At the compose message screen, select Options > Insert QuickText when entering the text.
        • 2. Select a preset text entry.
        • 3. Complete your message.
      • Save Messages as Preset Text
        • 1. At the compose message screen, select Options > Save as QuickText when entering the text to use it later as preset text.
        • 2. Complete your message.
      • Save Received Messages as Preset Text
    • Attaching Files to Messages
      • Add Contacts to Messages
        • 1. At the compose message screen, select Options > Insert Contacts when entering the text.
        • 2. Select a contact from your contacts list.
        • 3. Complete your message.
      • Add Slides to Messages
        • 1. At the compose message screen, select Options > Add New Slide when entering the text.
        • 2. Select a slide and add more files or text if needed.
        • 3. Complete your message.
      • Add Media Files to Messages
        • 1. At the compose message screen, select Options > Media Gallery when adding a media file.
        • 2. Select a file to add to your message.
        • 3. Complete your message.
      • Record Sounds for Messages
        • 1. At the compose message screen, select Options > Record Sound when adding a sound.
        • 2. Record a sound.
        • 3. Select it to add to your message.
        • 4. Complete your message.
    • Preview Messages
      • 1. At the compose message screen, select Options > Preview Message when entering the message or media file.
      • 2. Do one of the following:
    • Set Individual Message Settings
      • Request a Message Receipt
        • 1. When entering a message, select Options > Msg Settings > Msg Receipt > Request to request a message delivery notice.
        • 2. Complete your message.
      • Set Message Priority
        • 1. When entering a message, select Options > Msg Settings > Set Priority to set the priority level.
        • 2. Complete your message.
      • Change the Callback Number
        • 1. When entering the message, select Options > Msg Settings > Callback Number.
        • 2. Enter your callback number and select OK.
        • 3. Complete your message.
      • Send Messages Later
        • 1. When entering a message, select Options > Msg Settings > Send Later.
        • 2. Select Immediate or Set Time to set a specific time to send the message.
        • 3. Press the OK key to change the time.
        • 4. Select Next.
        • 5. Press the OK key to change the date.
        • 6. Select Done.
        • 7. Complete your message. Your phone will save the message and send it later.
      • Set the Validity Period
        • 1. When entering a message, select Options > Msg Settings > Validity Period.
        • 2. Select Set Time to set how long to keep your message valid before removing it from the phone if not sent.
        • 3. Press the OK key to change the time.
        • 4. Select Next.
        • 5. Press the OK key to change the date.
        • 6. Select Done.
        • 7. Complete your message.
      • Set the Slide Interval
        • 1. When entering the message, select Options > Msg Settings > Slide Interval.
        • 2. Select a time interval for the slides.
        • 3. Complete your message.
      • Set CC and BCC Fields
        • 1. When entering the message, select Options > Msg Settings > CC & BCC to enable or disable the CC and BCC address fields.
        • 2. Complete your message.
      • Request a Message Read Receipt
        • 1. When entering the message, select Options > Msg Settings > Msg Read Receipt > Request to request a notice sent upon reading the message.
        • 2. Complete your message.
  • Manage Received Messages
    • Reply to Text Messages
      • 1. When a message notification appears, select Inbox (to view the message) or Ignore (to clear the notification).
      • 2. From Inbox, highlight a message and select View > Reply (to compose your message) or Options (to access more features).
      • 3. Complete your message and select Send.
    • Reply to Multimedia Messages (with Auto Retrieve)
      • 1. At a message notification, select View (to view the message) or Later (to check it later).
      • 2. After viewing the message, select Reply or Options > Reply if the message has more than one slide.
      • 3. Complete your message and select Send.
    • Reply to Multimedia Messages (with Prompt)
      • 1. At the download notification, select Yes (to download the message) or Options (to retrieve it later or erase it without downloading).
      • 2. At the message notification, select View (to view the message) or Later (to check it later).
      • 3. Select Reply or Options > Reply if the message has more than one slide.
      • 4. Complete your message and select Send.
    • Forward Messages
      • 1. When viewing a received message, select Options > Forward.
      • 2. Enter a number or address.
      • 3. Complete your message and select Send.
    • Reply to all Recipients
      • 1. When viewing a received message, select Options > Reply All to send your reply to all the message recipients.
      • 2. Complete the message and select Send.
    • Reply with a Copy of the Message
      • 1. When viewing a received message, select Options > Reply with Copy.
      • 2. Complete your message and select Send.
    • Call Sender
    • Save Received Messages
    • View Recipients
    • View Sender Information
    • Lock Messages
    • Sort Messages in Inbox
      • 1. From Inbox, select Options > Sort.
      • 2. Select a sort option.
    • Go to Web Addresses in Messages
    • Manage Attached Files
      • Play Attached Files
      • Save Attached Files
      • View Messages with Multiple Slides
      • View Message Information
      • Replay Messages
  • Manage Voicemail
    • Configure your Voicemail
      • 1. Press and hold the 1 key.
      • 2. Follow the system prompts to create a password and record a greeting.
    • Check your Voicemail
  • Manage Sent Messages
    • Check Message Status in Sent Folder
    • Check Message Status in Outbox
    • Unable to Send Messages
    • Appended Messages
  • Manage Web Alerts
    • 1. From Web Alerts, select an alert.
    • 2. Select Connect to launch the browser.
  • Message Settings
    • Set Message Alerts
      • 1. From Alerts, select Msg Alert.
      • 2. Select an alert for messages.
    • Set Page Alerts
      • 1. From Alerts, select Page Alert.
      • 2. Select an alert for pages.
    • Set Voicemail Alerts
      • 1. From Alerts, select Voicemail Alert.
      • 2. Select an alert for voicemails.
    • Set Message List View
    • Set your Signature
      • 1. From Signature, enter your signature.
      • 2. Select OK to save the signature.
    • Edit Preset Messages
      • 1. From QuickText, do one of the following:
      • 2. Enter or edit the text.
      • 3. Select Save.
    • Enable Auto Retrieve
    • Enable CC/BCC Fields
    • Set Callback Number
      • 1. From Callback Number, enter a new number to change your default callback number.
      • 2. Select OK to save the number.
    • Enable Save to Sent
    • Enable Auto-Erase
    • Set Default Text
    • Request Text Message Receipts
    • Request Multimedia Message Receipts
    • Set your Voicemail Number
      • 1. From Voicemail Number, select Edit.
      • 2. Enter your voicemail number. (Use Options > Time Pause or Hard Pause to enter pauses.)
      • 3. Select Save.
    • Erase Recent List
    • Request Text Message Read Receipts
    • Set Multimedia Message Response
  • Message Groups
    • View Message Groups List
      • 1. From Message Groups, view your preloaded groups, followed by the custom groups you have created.
      • 2. Highlight a group and do one of the following:
    • Create a New Message Group
      • 1. From Message Groups, select New.
      • 2. Enter a name for the group and select Next.
      • 3. Select contacts from the list provided. A check mark appears next to each selection. You can also remove checkmarks.
      • 4. When finished, select Done.
    • Send Text Messages to Message Groups
      • 1. From Message Groups, highlight a group.
      • 2. Select Options > Send Text Msg.
      • 3. Complete your text message and select Send.
    • Send Multimedia Messages to Message Groups
      • 1. From Message Groups, highlight a group.
      • 2. Select Options > Send Pic Msg.
      • 3. Complete your multimedia message and select Send.
    • Add Contacts to Message Groups
      • 1. From Message Groups, highlight a group.
      • 2. Select Options > Edit.
      • 3. If you are modifying a group you created, select Next. Otherwise, go to the next step.
      • 4. Select contacts from the list provided. A checkmark appears next to each contact in the group. Press the OK key to add or remove checkmarks.
      • 5. When finished, select Done.
    • Assign Message Tone to Message Group
      • 1. From Message Groups, select a group.
      • 2. At the groups details screen, scroll to the group name.
      • 3. Select Options > Msg Tone > Assign Msg Tone and a ringer from the list. Scroll to play the ringers.
    • Send a Message Group vCard
      • 1. From Message Groups, highlight a group.
      • 2. Select Options > Send > Via Bluetooth.
      • 3. Complete the appropriate task to send the contact information.
    • Erase a Message Group
      • 1. From Message Groups, highlight a group.
      • 2. Select Options > Erase > Yes.
  • Erase Messages
    • Erase a Single Message
    • Erase Messages from a Folder
    • Erase All Messages
  • Check Message Count
• 7 @metro
  • How does BREW Work?
  • Download an Application
    • 1. From @metro, select MobileShop > Catalog. When a connection is made, a list of application types appears.
    • 2. Select an application type. A list of applications appears. Long titles scroll left as you highlight them.
    • 3. Select an application. A list of usages appears. There may be one or more usages available. Prices are specified for each usage.
    • 4. Select a usage for the application. You are prompted to confirm your purchase.
    • 5. Select Yes to confirm. The application downloads to your phone. Download times may vary.
  • Access Help for @metro
• 8 MetroWEB
  • Launch Browser
  • Browse the Web
  • Add a Bookmark
    • 1. Surf to the Web page you want to bookmark and select Options > Add to Bookmarks.
    • 2. Edit the bookmark’s details, if needed.
    • 3. Select Options > Save to save the bookmark.
• 9 Settings
  • Settings Menu
  • Bluetooth
    • Enable Bluetooth
    • Pair with a Device
      • 1. Prepare the Bluetooth device (accessory) for pairing as described in the device’s user guide.
      • 2. From My Devices, select Find New. Your phone then searches and detects any available Bluetooth devices in the vicinity.
      • 3. At the device list, highlight a device and select Add.
      • 4. If necessary, enter the password provided with the Bluetooth device and select OK.
    • Use Bluetooth Devices
      • Connect to a Device
      • Disconnect from a Device
      • Rename a Device
        • 1. From My Devices, highlight a device.
        • 2. Select Options > Rename.
        • 3. Enter a new name and select Save.
      • Delete a Device
        • 1. From My Devices, highlight a device.
        • 2. Select Options > Delete > Yes.
      • View Device Services
        • 1. From My Devices, highlight a device.
        • 2. Select Options > Services.
        • 3. At the service list, highlight a profile and select Connect to change the active profile.
    • Change Bluetooth Settings
      • Change Phone’s Name
      • Limit Visibility
      • View Supported Services
      • Enable OBEX Authentication
  • Convenience
    • Enable Date/Time Display
    • Set Date and Time
      • 1. From Set Time/Date, do the following to change the date:
      • 2. Press the OK key to save the date.
      • 3. Do the following to change the time:
      • 4. Press the OK key to save the time.
      • 5. Select Done.
    • Enable Airplane Mode
    • Auto Keyguard
      • Enable Auto Keyguard
      • Unlock Keyguard
    • Enable Auto-Hyphenation
    • Use 1-Touch Dialing
    • Call Contact using Fast Find
      • 1. From Fast Find, select Enabled to turn on fast find.
      • 2. From the home screen, press the keys corresponding to the letters of the name you want to find. A matching contact or speed dial entry appears.
      • 3. Scroll to your desired contact and press the Send key to call the number.
    • Enable Frequent List
    • Enable Minute Alert
    • Set Missed Call Alert
    • Enable Any Key Answer
  • Display
    • Set Wallpaper
      • 1. From Set Wallpaper, select Saved Images or Wallpapers.
      • 2. Select a file.
    • Set Theme
    • Set Main Menu View
    • Set Icon Display Mode
    • Set Greeting Banner
      • 1. From My Banner, select Edit.
      • 2. Press the Back key to clear the current banner.
      • 3. Enter your new text (up to 14 characters) or press the # Space key for a blank banner.
      • 4. Select Save.
    • Set Backlight Duration
    • Set Brightness
      • 1. From Brightness, scroll to change the brightness level.
      • 2. Select Save.
    • Set Contrast
      • 1. From Contrast, scroll to change the contrast level.
      • 2. Select Save.
    • Set Language
    • Set Time and Date Format
  • Sounds
    • Ringers
      • Set Ringers
      • Set Roam Ringer
    • Enable Roam Ringer
    • Volume
      • Set Ringer Volume
        • 1. From Ringer Volume, scroll right or left to set the ringer volume.
        • 2. Press the OK key to save.
      • Set Speakerphone Volume
        • 1. From Spkrphone Volume, scroll right or left to set the speakerphone volume.
        • 2. Press the OK key to save.
      • Set Earpiece Volume
        • 1. From Earpiece Volume, scroll right or left to set the earpiece volume.
        • 2. Press the OK key to save.
      • Set Keypad Volume
        • 1. From Key Volume, scroll right or left to set the keypad volume.
        • 2. Press the OK key to save.
      • Enable Smart Volume
    • Set Power On/Off Sounds
    • Set Key Press Sounds
  • Accessories
    • Set Headset Sounds
    • Enable Auto-Answer
    • Connect to TTY Device
      • 1. Connect the TTY device to your phone.
      • 2. From TTY Device, select OK to clear the notification.
      • 3. Select one of the following:
    • Connect to Hearing Aid Device
      • 1. Connect the T-coil hearing aid device to your phone.
      • 2. From T-coil Hearing Aid, select OK > Enabled.
  • Network
    • Enable Privacy Alert
    • Enable Voice Privacy
    • Enable Roaming Service Alert
    • Set Roaming Restrictions
    • Set Phone Line
    • Set Location Information
    • Enable Roaming Call Alert
  • Security
    • Lock Phone
      • Set Lock Phone
        • 1. From Security, enter your four-digit lock code.
        • 2. Select Lock Phone > OK and one of the following:
      • Unlock the Phone
        • 1. From the home screen, select Unlock.
        • 2. Enter your four-digit lock code.
    • Set Limit Calls
      • 1. From Security, enter your four-digit lock code.
      • 2. Select Limit Calls and one of the following:
    • Change Lock Code
      • 1. From Security, enter your four-digit lock code.
      • 2. Select New Lock Code > Yes.
      • 3. Enter a new four-digit code.
      • 4. Re-enter your new lock code.
• 10 Media Gallery
  • Media Gallery Menu
  • Images
    • Send an Image
      • 1. From Saved Images, select an image.
      • 2. Select Send > Via MMS (to attach to a multimedia message) or Via Bluetooth (to send to a Bluetooth-enabled device).
      • 3. Complete the appropriate task.
    • Change the Default Wallpaper
      • 1. From Wallpapers, select a wallpaper.
      • 2. Select Set Default.
    • Assign a Caller ID
      • 1. From Caller IDs, select an image.
      • 2. Select Assign.
      • 3. At the contacts list, select a contact.
  • Tones
    • Send a Sound
      • 1. From Saved Sounds, highlight a sound.
      • 2. Select Send > Via MMS (to attach to a multimedia message) or Via Bluetooth (to send to a Bluetooth-enabled device).
      • 3. Complete the appropriate task.
    • Assign a Ringer
      • 1. From Ringers, highlight a ringer.
      • 2. Select Assign and choose how you want to assign the ringer.
      • 3. Complete the appropriate task.
    • Play a Voice Memo
      • 1. From Voice Memos, highlight a memo you have recorded.
      • 2. Select Play.
  • Media File Options
    • Rename a File
      • 1. From a media file list, highlight a file.
      • 2. Select Options > Rename.
      • 3. Enter a new name and select Save.
    • Send a File
      • 1. From a media file list, highlight a file.
      • 2. Select Options > Send > Via MMS (to attach to a multimedia message) or Via Bluetooth (to send to a Bluetooth-enabled device).
      • 3. Complete the appropriate task.
    • Assign a File
      • 1. From a media file list, highlight a file.
      • 2. Select Options > Assign and choose how to assign the file.
      • 3. Complete the appropriate task.
    • Lock a File
      • 1. From a media file list, highlight a file.
      • 2. Select Options > Lock to protect a file from being accidently erased. To unlock the file, select Options > Unlock.
    • Play a File
      • 1. From a media file list, highlight a file.
      • 2. Select Options > Play.
    • View File Details
      • 1. From a media file list, highlight a file.
      • 2. Select Options > Details to view the details such as file size or save date.
      • 3. Select OK to exit.
    • Modify a File
      • 1. From a media file list, select a file.
      • 2. Select Options > Modify.
      • 3. Select Options and an option to rotate, resize, and so on.
      • 4. When done, select Save to save over an existing file or as a new one.
  • Erase Media Files
    • Erase a Single File
      • 1. From a media file list, highlight a file.
      • 2. Select Options > Erase > Yes.
    • Erase All Files in a Folder
    • Erase All Image Files
    • Erase All Sound Files
    • Erase All Media Files
• 11 Phone Info
  • View Version Information
  • View Phone Icons
• 12 Tools
  • Tools Menu
  • Voice Memo
    • Record Voice Memos
      • 1. From Voice Memo, select Record New.
      • 2. Record your voice memo and select Stop when done.
      • 3. Select Save.
    • Play Voice Memos
      • 1. From Recorded Memos, highlight a memo.
      • 2. Select Play to play the memo or Options to access more features.
  • Scheduler
    • Create an Event
      • 1. From Add New Event, enter a name. Scroll down to move to the next field when done.
      • 2. Press the OK key to select an event type from the list.
      • 3. Press the OK key to change the date, if needed.
      • 4. Press the OK key to change the time, if needed.
      • 5. Press the OK key to change the duration, if needed.
      • 6. Press the OK key to select a priority from the list.
      • 7. Press the OK key to select a reminder from the list.
      • 8. Press the OK key to select a reminder sound from the list.
      • 9. Press the OK key to select During Event to enable silent mode or Off to have normal sounds.
      • 10. Press the OK key to select a recurring event from the list, if needed.
      • 11. Select Save.
    • View Events
      • View Events by Month
        • 1. From View Month, scroll through the month view. (Days with events are highlighted.)
        • 2. Press the OK key to select a date.
        • 3. Do one of the following:
      • View Events by Date
      • Go to a Specific Date
        • 1. From Go to Date, scroll left or right to move between month, day, and year fields. Scroll up or down to change month, day, or year.
        • 2. Press the OK key to select the date.
      • View Events by List
      • Return to the Current Date
      • Sort Events by Time
      • Sort Events by Type
      • Sort Events by Priority
    • Modify Events
      • Edit an Event
        • 1. From View Day, select an event.
        • 2. At the event details screen, select Options > Edit.
        • 3. Modify the event and select Save.
      • Send an Event
        • 1. From View Day, select an event.
        • 2. At the event details screen, select Options > Send > Via MMS (to attach the file to a multimedia message) or Via Bluetooth (to send the file to a Bluetooth-enabled device).
        • 3. Complete the appropriate task.
      • Copy an Event
        • 1. From View Day, select an event.
        • 2. At the event details screen, select Options > Copy.
        • 3. Enter a new name for the event.
        • 4. Complete the event and select Save.
    • Erase Events
      • Erase an Event
        • 1. From View Day, select an event.
        • 2. At the event details screen, select Options > Erase > Yes.
      • Erase the Current Day’s Events
      • Erase All Events
      • Erase All Past Events
    • Change Scheduler Settings
      • Set Scheduler Hours
        • 1. From Scheduler Hours, modify the start and end times.
        • 2. Select Save when done.
      • Erase Events Automatically
      • Set Event Priority
      • Set Event Reminder
      • Set Event Reminder Alert
      • Set Event Silent Mode
  • Alarm Clock
    • Set an Alarm
      • 1. From Alarm Clock, scroll to one of the alarms and select Set.
      • 2. Press the OK key to change the time, if needed.
      • 3. Press the OK key to select a sound from the list.
      • 4. Press the OK key to select a recurring alarm from the list, if needed.
      • 5. Press the OK key to enter a note.
      • 6. Select Save.
    • Set the Quick Alarm
      • 1. From Alarm Clock, scroll to the quick alarm and select Set.
      • 2. Choose a time. (A notification shows the quick alarm is on.)
  • Use Tip Calculator
    • 1. From Tip Calculator, enter the amount of your bill.
    • 2. Scroll down to select the percentage you want to tip.
    • 3. Scroll down to enter the number of people sharing the bill (or enter 1 if paying the entire bill).
    • 4. Select Next to view the final bill.
    • 5. Select Done when finished.
  • Use Calculator
    • 1. From Calculator, enter the first number.
    • 2. Select a mathematical operation:
    • 3. Enter the second number, and press the OK key to view the result.
    • 4. Select Exit to return to the menu, or Options and one of the following:
  • Use Timer
    • 1. From Timer, select Set.
    • 2. Enter the time length.
    • 3. Select Sound, and choose from the list to modify the sound.
    • 4. To work the timer, select from the following options:
  • Use Stopwatch
• 13 Get Help
  • Customer Support
  • Qualified Service
  • Phone Accessories
  • Become a Product Evaluator
• Index