Interrupting the toasting process, Warming function, Thaw function – Kompernass KH 1207 User Manual

Page 6: Crumb tray, Bread roll holder

Advertising
background image

- 4 -

• This appliance has a lifting function, which makes it

easier and safer for you to take the hot slices of
toast from the toaster slots

w

. For this, slide the

operator button

e

upwards.

Interrupting the toasting

process

If you wish to interrupt the toasting process, press
the STOP button

u

. The toaster switches itself off.

Warming function

The warming function

y

makes it possible for you

to warm bread without browning it. For example,
for toast that has gone cold. The bread is only briefly
warmed.

• Insert the bread and press the operator button

e

down.

• Activate the button for the warming function

y

.

The control lamp integrated into the button for
the warming function

y

glows.

• The toaster switches itself off automatically, the

control lamp extinguishes and the bread slices
are ejected.

Thaw function

Through activation of the thaw function

t

frozen

bread can also be thawed. The toaster slowly
warms the bread without browning it.

• Insert the bread and press the operator button

e

down.

• Activate the button for the thaw function

t

. The

control lamp integrated into the button for the
thaw function

t

glows.

• The toaster switches itself off automatically, the

control lamp extinguishes and the bread slices
are ejected.

Dependent on the setting of the browning level,
the bread is either thawed or browned.

Crumb tray

When toasting, crumbs that fall from the bread are
collected in the crumb tray

i

. To empty it, simply

pull the crumb tray

i

out to the side.

Bread roll holder

• NEVER lay bread rolls directly onto the toaster,

ALWAYS use the bread roll holder

q

.

• Open up the feet of the bread roll holder

q

.

• Place the bread roll holder

q

so that the feet

of the bread roll holder

q

are retained in the

toaster slots

w

.

• Place the bread rolls onto the holder and start

the toasting procedure. Set the browning
regulator

r

to a maximum of level of 3.

Place the rolls onto the bread roll holder

q

so that they cannot fall through the holder.
After toasting, the rolls will be very hot.

• As soon as the toaster switches itself off, check

the level of browning. Should the bread roll
have the desired level of browning, turn it over
to brown the other side.

• Switch the toaster back on.

Important

!

Wait until the bread roll holder

q

has cooled down

before removing it! The bread roll holder

q

becomes

very hot! Risk of Burns!

IB_KH1207_E23296_LB6 29.07.2008 13:26 Uhr Seite 4

Advertising