Kenwood KDV-MP7339 - Manual (Page 31)

English | 31
Menu items Selectable settings, [reference page]
Disc Setup 2
* 5
D. Audio Output Select the signal format emitted through the DIGITAL OUT (optical)
terminals. (☞ also page 38)
PCM Only : Select this when connecting an amplifier or a decoder
incompatible with Dolby Digital, DTS, or MPEG Audio, or
connecting to a recording device.
Dolby Digital : Select this when connecting an amplifier or a decoder
compatible with Dolby Digital.
Stream : Select this when connecting an amplifier or a decoder
compatible with Dolby Digital, DTS, or MPEG Audio.
Down Mix When playing back a multi-channel disc, this setting affects the signals
reproduced through the LINE OUT plugs.
Dolby Surround : Select this to enjoy multi-channel surround audio
by connecting an amplifier compatible with Dolby Surround.
Stereo : Normally select this.
D. (Dynamic) Range Compres.
(Compression) You can enjoy a powerful sound at a low volume level while playing
Dolby Digital software.
Auto : Select to apply the effect to multi-channel encoded software.
On : Select this to always use this function.
Tuner
IF Band Width Auto : Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
Wide : Subject to the interference from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
* 5 Selectable only for “DISC” (disc playback pauses).
Continued on the next page