Kyocera Jax S1300 - Manual (Page 57)

57
Set Speakerphone Volume
1. From Volume , select Spkrphone Volume .
2. Scroll right or left to set the
speakerphone volume.
3. Press the OK key to save.
Set Earpiece Volume
1. From Volume , select Earpiece Volume .
2. Scroll right or left to set the earpiece volume.
3. Press the OK key to save.
Set Keypad Volume
1. From Volume , select Key Volume .
2. Scroll right or left to set the keypad volume.
3. Press the OK key to save.
Enable Smart Volume
From Volume , select Smart Volume > Enabled
to automatically adjust the volume during a call,
based on surrounding noise levels.
Set Power On/Off Sounds
1. From Pwr On/Off Sound , select
Power On Sound or Power Off Sound .
2. Select a sound to play when your phone
powers on or off. (Scroll down the list to
play the sounds.)
Keypad
Control the keypad tones of the phone.
Set Key Press Sounds
From Keypad , select Key Sounds >
Tone , Click , or Off to set the sounds when
pressing the keypad.
Set Key Tone Length
From Keypad , select Key Length > Normal or
Long to set the length of the keypad tone.
Enable DTMF Tones
From Keypad , select DTMF Tones > On to send
dual-tone multi-frequency (DTMF) tones when
you press the keypad.
Accessories
Set Headset Sounds
With a headset attached to your phone, you
can play the ringer through the headset or
phone speaker.
From
Headset Sounds , select Out of phone
(ringing from the phone speaker) or
Out of headset (ringing from the headset).
Enable Auto-Answer
From Auto-Answer , select After 5 Seconds . The
phone automatically answers after five seconds
with a headset attached.