King Kutter SCREENPLAY 7200 - Manual (Page 35)

34
Red LED behavior and projector errors
,I WKH SURMHFWRU LV QRW IXQFWLRQLQJ SURSHUO\ DQG WKH UHG /(' LV EOLQNLQJ FRQ
VXOW Table 2 WR GHWHUPLQH D SRVVLEOH FDXVH 7KHUH DUH WZR VHFRQG SDXVHV
EHWZHHQ WKH EOLQNLQJ F\FOHV 9LVLW www.infocushome.com/support IRU
PRUH GHWDLOV RQ WKH UHG /(' HUURU FRGHV
Projected image size
NOTE 9LVLW RXU ZHEVLWH DW www.infocushome.com/support IRU DQ LQWHUDF
WLYH LPDJH VL]H FDOFXODWRU
Table 3: Red LEDs
Red LED Behavior Explanation
One (1) blink The lamp won't strike after five (5)
attempts. Check the lamp and lamp door
installations for loose connections.
Three (3) blinks The projector has shut down the lamp.
Turn off the projector, wait one minute,
then turn it back on. Replace the lamp.
Contact Technical Support for repair if
replacing the lamp does not solve the
problem.
Four (4) blinks The fan has failed. Replace the lamp (the
lamp module contains a fan). Contact
Technical Support for repair if replacing
the fan does not solve the problem.
Five (5) blinks The projector is overheating. Check for a
blocked air vent. Contact Technical Sup-
port for repair if clearing the air vents
does not solve the problem.
Table 4:
Range of projection distances for a given screen size
16:9 Screen
dimensions
(inches/m)
Projection Distance
Screen
diagonal
(inches/m) Maximum
zoom
(feet/m) Minimum
zoom
(feet/m)
27x48
.69x1.22
55.1/1.4 6.0/1.82 8.3/2.54
34x60
.9x1.5
68.8/1.75 7.5/2.3 10.4/3.2
40.5x72
1.0/1.8
82.6/2.1 9.0/2.7 12.5/3.8
45x80
1.1x2.0
91.8/2.3 10.0/3.0 13.9/4.2
49x87
1.2/2.2
99.8/2.5 10.8/3.3 15.1/4.6
52X92
1.3X2.3
105.6/2.7 11.4/3.5 16.0/4.9
54X96
1.4X2.4
110.1/2.8 11.9/3.6 16.7/5.1
58X104
1.5X2.6 119.3/3.0 12.9/3.9 18.1/5.5
65X116
1.7X3
133.1/3.4 14.4/4.4 20.1/6.1
SP7200 User's Guide.fm Page 34 Friday, November 8, 2002 2:50 PM