Kyocera K322 - Manual (Page 49)

User Guide for the Kyocera K322 Phone 43
Note: To purchase a cable, call 800-349-4188
(U.S.A. only), 858-882-1410, or visit
www.kyocera-wireless.com/store .
1. Connect the phone to the laptop or PC.
2. Set the Com speed.
3. Select Menu
→
Settings
→
Network
→
Data/Fax Calls .
4. Press to select an option:
– Voice only allows only voice calls.
– Fax , next call or Data , next call sets the
phone to fax mode or data mode for the
next incoming call or the next 10 minutes.
– Fax , until off or Data , until off forces the
phone into fax mode or data mode until
the phone is turned off.
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the
hearing impaired.
Note: Enable TTY only when using the phone with
a TTY device.
1. Connect the TTY device to the phone.
2. Enter from
your keypad.
3. Press to select the TTY option.
4. Close the Information window by pressing
to select OK .
5. Highlight TTY On and press .
Setting position location
This setting allows you to share your location
information with network services other than
emergency services (For example: 911, 111, 999,
and 000) in markets where service has
been implemented.
Note: This feature works only when your phone is
in digital mode. You do not have the option of
turning off the locator to emergency services.
1. Select Menu
→
Settings
→
Network
→
Location .
2. Select 911 Only or Location On .
– 911 Only (default) shares your position
information only with emergency services
when you call your 3-digit emergency
code (911, 000, 111, etc.).
– Location On shares your position
information with your service provider’s
network, in addition to
emergency services.
82-N8863-1EN.book Page 43 Wednesday, May 17, 2006 1:22 PM