Kompernass KH 4061 - Manual (Page 7)

- 7 -
KH 4061
SELECT
• All massage sequences are
interrupted as long as this
button is kept pressed.
INTENSITY
You can control the intensity of the
massage by means of this button.
• Press this button to receive the
desired massage intensity: Medium
➜
High
➜ Low
SPEED
You can control the cycle speed of the
massage motors using this button.
• Press this button to receive the desired
speed: Medium
➜ Fast ➜ Slow
HEAT ON / OFF
• Press this button to activate the heat
function.
• Press this button again to deactivate
the heat function.
When the heat function is active, the
bottom red diode at the edge of the
remote control lights up. The heat
function automatically switches itself
off after 15 minutes operation. To re-
activate the heat function, press the
HEAT ON / OFF button again.
The massage function remains active
when you switch the heat function on or
off.
Note:
The automatic cut-off after 15 minutes
applies to both operating modes
(massage/heat), related to the function
activated first.
Example: If the heat function is added
5 minutes after the massage function,
the heat function is only available for
the remaining 10 minutes.
Cleaning
• Pull the connector out of the power
socket before cleaning the massage
mat.
• Never immerse the massage mat in
water or other liquids for cleaning.
• Remove fluff with a clothes brush.
• Stains can be treated with a slightly
damp cloth.
Disposal
Dispose of the appliance via an approved
waste disposal company or via your
communal waste disposal facility.
Do not throw the device in your normal
domestic waste.
Observe the currently applicable
regulations. In case of doubt, please
contact your waste disposal centre.
Warranty and Service
Please read the conditions for warranty
and service centre addresses on the
warranty card.
Kompernaß GmbH
Burgstrasse 21
D-44867 Bochum
www.kompernass.com