Kodak EasyShare C122 - Manual (Page 43)

Troubleshooting
www.kodak.com/go/support 37
Computer/connectivity problems
You cannot take a
picture ■ Turn the camera off, then on again.
■ Depress the Shutter button all the way ( see page 4 ).
■ Insert new/charged batteries in the correct orientation ( see
page 1 ).
■ Memory is full. Transfer pictures to the computer ( see page 31 ),
delete pictures ( see page 16 ), or insert another card.
Memory card not
recognized or camera
freezes with card ■ Remove and reinsert the card ( see page 3 ).
IMPORTANT: Insert a card until it clicks.
■ Card may be corrupted. Format the card in the camera ( see
page 30 ).
■ Use another memory card. Only SD or SDHC Cards are supported.
Cannot find the
desired picture/video ■ To view pictures on a card or in internal memory, see page 16 .
Status Solution
Slide Show does not
run on an external
video device ■ Adjust the camera Video Out setting ( see page 29 ).
■ Make sure the external device settings are correct. (See the
device’s user guide).
Computer does not
communicate with
the camera ■ Turn off the camera, then turn it back on.
■ Make sure the batteries are charged and installed correctly ( see
page 1 ).
■ Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is
connected to the camera and directly to the computer (not
through a USB hub).
See page 31 . Then turn on the camera.
IMPORTANT: Use only the cable included with this camera!
■ See KODAK Software Help at www.kodak.com/go/camerasw .
Status Solution