Kompernass KH 2232 - Manual (Page 15)

- 13 -
Baking moulds and kneading paddles
The surfaces of the baking moulds
¶
and kneading paddles ² have a non-
stick coating. While cleaning, do not use
any abrasive detergents, cleaning
powders or objects that may cause
scratches on the surface.
Due to moisture and vapours the surface
of various parts may undergo changes in
their appearance over a period of time.
This does not affect the quality or
functional performance of the appliance.
Before cleaning, take the baking moulds
¶ and kneading paddles ² out of the
baking area. Wipe the outside of the
baking moulds
¶ with a damp cloth.
ƽ
Important
Never immerse the baking moulds ¶ in
water or other liquids.
Clean the interior of the baking moulds
¶ with warm, soapy water.
If the kneading paddles are
² incrusted
and hard to release, fill the baking
mould
¶ with hot water for approx.
30 minutes. If the retainer in the knea-
ding paddle
² is clogged, you can clean
it carefully with a wooden skewer.
Do not use any chemical cleaning agents
or thinners to clean the bread maker.
Technical data
Model: Bread Maker
KH 2232
Power supply : 220-240V~50Hz
Power consumption : 850 Watt
Warranty & customer service
The warranty conditions and the service
address can be found in the warranty
booklet.
Disposal
Never throw the Automatic Bread
Maker into the normal household
waste.
Observe the currently applicable regula-
tions. In case of doubt, please contact
your waste disposal centre.
Importer
Kompernaß GmbH
Burgstrasse 21
D-44867 Bochum
www.kompernass.com
KH 2232
KH2232_Brotback_UK.qxd 24.03.2006 14:01 Uhr Seite 13