Kodak 9090DC - Manual (Page 46)

A-61662 October 2011 5-7
Toggle Color Mode screen The Toggle Color Mode screen provides the following features.
Preferences
• Use patch code detection to toggle color mode — check this box
to enable toggle patch detection.
• Start in Black and White — when checked, the batch will
automatically start in Black and White mode, otherwise the batch will
start in either color or grayscale as determined by the basic batch
setup scan mode.
• Delete images from toggle patch sheets — when checked, images
for the toggle patch sheets will be automatically deleted by VRS.
• Enable patch confirmation tone — when checked, a confirmation
tone will signal that a patch has been recognized. I f grayed out, this
feature is not currently supported by the scanner firmware.
These patch codes are recognized when toggle color mode is enabled:
Black & White Settings
• Black and White DPI — select the DPI to use when the scanner
switches to Black and White mode. This can be different than the
color (or grayscale) DPI selected elsewhere for the batch. For
example, basic batch setup selects Color 150 dpi, but black and
white images use 300 dpi. Refer to the Kofax VRS Users Guide or
VRS online help for more information regarding this feature.