Kodak 9090DC - Manual (Page 13)

A-61662 October 2011 2-1
2 Installation
Contents
Installing the exit deflector .............................................................. 2-1
Installation: with a USB connection ................................................ 2-2
Installation: with an optional SCSI connection ................................ 2-3
This section provides detailed information supporting the Installation
Guide that is provided with your scanner. Follow these steps in the
order they are provided to install your scanner.
NOTES:
• If you have already performed all of the steps in the Installation
Guide, skip this section.
• When positioning the scanner, be sure to provide adequate
clearance at the back of the scanner if you will be using the rear
document exit. For more information on the rear document exit, see
Appendix C, Installing and Using the Straight Pass-Through Adapter.
• The scanner weighs approximately 112 pounds (50.8 kg). Be sure to
incorporate the appropriate manpower before moving or lifting the
scanner.
• Verify that your host PC meets the system requirements as specified
in Appendix A, Specifications.
• The scanner is packed with a set of language-specific Control Panel
overlays. The English overlay is installed on the scanner. If you prefer
a different language, take the desired overlay and adhere it to the
control panel.
Installing the exit
deflector
The scanner is packed with two exit deflectors. The exit deflector aids
in better document stacking. The standard exit deflector should be used
for most of your scanning needs. The lightweight exit deflector should
be used when scanning light-weight documents.
• Install the exit deflector by clipping it to the rail at the top of the
scanner.