Kenwood TK-3160 - Manual (Page 2)

Specifications
Options
All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete list of all accessories and options.
Applicable MIL-STD & IP
ADS#08208 Printed in USA
JQA-QMA1205
footnotes from Front:
1 Two-Tone Decode (3 sets x 2 pairs each); Single / Two-Tone
Encode (1 tone).
2 DTMF includes PTT ID, Emergency ANI & Stun.
3 Special Alert Tone Pattern operates for 2-Tone & DTMF selective
call decode only (1 pattern of 16 tones).
4 KPG-82D required: Windows ® 98/ 2000/ Me/XP compatible;
English/Spanish screen languages.
Model TK-2160 TK-3160
GENERAL
Frequency Range
Type 1 136-174 MHz 450-490 MHz
Type 2 – 470-512 MHz
Type 3 – 400-430 MHz
Number of Channels Max. 16
Channel Spacing
Wide/Narrow 25, 30kHz/12.5,15kHz 25kHz/12.5kHz
Channel Step 2.5, 5, 6.25, 7.5kHz 5, 6.25kHz
Operating Voltage 7.5V DC±20%
Battery Life (5-5-90 duty cycle)
with KNB-25A (1200mAh) Approx. 8 hours
with KNB-26N (2000mAh) Approx. 12 hours
with KNB-35L (1950mAh) Approx. 11 hours
Operating Temperature Range -22°F ~ +140°F (-30°C ~ +60°C)
[-14°F ~ +140°F (-10°C ~ +60°C)
when KNB-24L/26N in use]
Frequency Stability ±2.5ppm (-22°F ~ +140°F)
Antenna Impedance 50 Ω
Channel Frequency Spread
Type 1 38MHz 40MHz
Type 2 – 42MHz
Type 3 – 30MHz
Dimensions (W x H x D), Projections not included
Radio Only 2.2” x 4.3” x 0.72” (56 x 109.3 x 18.4mm)
with KNB-35L
2.2” x 4.3” x 1.35” (56 x 109.3 x 34.5mm)
with KNB-25A 2.2” x 4.3” x 1.6” (56 x 109.3 x 40.7mm)
with KNB-26N 2.2” x 4.3” x 1.6” (56 x 109.3 x 40.7mm)
Weight
Radio Only 5.8oz (165g)
with KNB-35L 10.2oz (290g) without antenna
with KNB-25A 12.5oz (355g) without antenna
with KNB-26N 14.1oz (400g) without antenna
Model TK-2160 TK-3160
GENERAL
FCC ID
Type 1 ALH36413110 ALH36423110
Type 2 – ALH36423120
Type 3 – ALH36423130
IC Certification
Type 1 282D-36413110 282D-36423110
Type 3 – 282D-36423130
RECEIVER (Measurements made per TIA/EIA-603)
Sensitivity (12dB SINAD)
Wide/Narrow 0.25µV/0.28µV
Selectivity
Wide/Narrow 70dB/62dB
Intermodulation Distortion
Wide/Narrow 65dB/60dB
Spurious Response 65dB
Audio Output 500 mW with less than 10% distortion
TRANSMITTER (Measurements made per TIA/EIA-603)
RF Power Output
High/Low 5W/1W 4W/1W
Spurious Response 70dB
Modulation
Wide/Narrow 16KØF3E/11KØF3E
FM Noise
Wide/Narrow 45/43dB 45/40dB
Audio Distortion Less than 5%
■ KNB-25A
Ni-Cd Battery Pack
(1,200mAh)
■ KNB-26N
Ni-MH Battery Pack
(2,000mAh)
■ KNB-35L
Li-ion Battery Pack
(7.4V/1950mAh)
■ KNB-40LC
Li-ion Battery Pack
(7.4V/1950mAh) I.S.
■ KBP-5
Battery Case
■ KSC-25
Rapid Charger
■ KSC-30
Charger for KNB-25A
and KNB-26N
■ KRA-22
VHF Low Profile
Helical Antenna
■ KRA-23
UHF Low Profile
Helical Antenna
■ KRA-26
VHF Helical Antenna
■ KRA-27
UHF Whip Antenna
■ KMC-17
Speaker Microphone
■ KMC-21
Speaker Microphone
■ KEP-2
Earphone Cord Kit
for KMC-17
■ KHS-1
Head Set with VOX/PTT
■ KHS-22
Head Set
■ KVC-3
Regular Rate Vehicular
Charger Adapter
(for KSC-30)
■ KVC-4
Rapid Rate Vehicular
Charger Adapter
(for KSC-25)
■ KHS-7A
Lightweight Single
Muff Headset
■ KHS-8BL
2-wire Palm Mic with
Earphone (Black)
■ KHS-9BL
3-wire Lapel Mic
with Earphone (Black)
■ KLH-138
Leather Case
■ KBH-12
Belt Clip
Standards Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
MIL-STD 810C MIL-STD 810D MIL-STD 810E MIL-STD 810F
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I
Rain 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III
Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4
Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4
Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III
Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I
Shock 516.2/Procedure I, II, V 516.3/Procedure I, IV 516.4/Procedure I, IV 516.5/Procedure I, IV
International Protection Standard
Dust & Water Protection IP54/55
Kenwood follows a policy of continuous advancement in development.
For this reason specifications may be changed without notice.
FleetSync
® is a registered trademark of KENWOOD Corporation in the United States and/or other countries.
KNB-35L
KSC-25
KVC-3