Kenwood DDX6017 - Manual (Page 81)

English 81
Tone curve setup
You can set a Tone curve.
Tone setup screen
1 Bass adjustment items are displayed.
2 Middle adjustment items are displayed.
3 Treble adjustment items are displayed.
4 Bass DC Extend settings
If turned "On", it extends the bass center
frequency to the low register by approximately
20%.
5 Returns to the Equalizer screen.
Tone curve can be set for each source.
You can adjust the following frequency bands.
Bass: 60, 70, 80, 100/150 (When "Q Factor" is
"2.00") Hz
Middle: 500, 1k, 1.5k, 2k Hz
Treble: 10k, 12.5k, 15k, 17.5k Hz
Set a level 4
Set a center frequency 3
T r e b l e M i d d l e B a s s
Select a frequency band you wish to adjust 2
To n e
Display the Tone setup screen 1
You can set it up only when Bass or Middle is
adjusted.
R e t u r n
Close the Tone setup screen 6
Set a Q factor 5
FREQ
Level
Q Factor
O f f
FREQ
Le v e l
Q F a c t o r
100 Hz
- 5
1.0
Re t u r n
B a s s DC EXT
To n e
B a s s
M i d d l e
T r e b l e
5
3
4
2
1
DDX6017(En)r2.2 04.12.20 9:17 PM ページ81