Saving, editing, and erasing ptt contacts – Kyocera KX12 User Manual
Page 18
10
Using Push to Talk
2.
Listen for the “Ready to Speak” tone
(three rapid chirps).
3.
Speak while pressing the walkie-talkie button.
4.
Release the walkie-talkie button when finished
speaking. This allows another party to reply.
5.
Wait for the “Ready to Speak” tone, then press
the walkie-talkie button again to speak.
6.
To end the PTT call, press
or
.
If the other party ends the call, no action
is required.
Receiving a PTT alert
When your phone receives a PTT alert, the phone
beeps. The name or phone number of the caller
appears on the screen with the message
“[name /phone number] requests a PTT call.
Please press the Walkie-Talkie button.”
• To ignore the alert, press
to select
Ignore.
• To accept the alert and call the person, press
the walkie-talkie button.
Saving, editing, and erasing PTT
contacts
Adding a PTT contact
You can add new PTT contacts and view their
presence in the PTT contacts directory using the
main PTT menu.
Note:
The potential contact will be notified and
must give permission before you can save their
phone number as a contact.
1.
Select
Menu
→
Push to Talk
→
PTT Contacts
.
2.
Press
to select
Options
.
Note:
When you are adding your first PTT
contact, you will be asked “No PTT Contacts.
Add New?” Press
to select
Yes
.
3.
Press
to select
Add New Contact
.
4.
Enter the PTT contact number.
5.
Press
down
and
enter the PTT
contact name.
If you do not enter a contact name, the contact
phone number will appear on your phone
instead of a name.
6.
Press
to
select
Save.
The message,
“Sending request...” appears.
– If the PTT contact number is valid and the
other party accepted your request to be
added, “Contact Name Added” appears.
– If the other party refused your invitation or
did not respond within a 3-minute period,
“Contact Name Not Added” appears.
Note:
The other party cannot receive or
respond to your invitation if their phone is off
or if they are outside of the service area.
7.
If “Contact Name Not Added” appears, press
to select
OK
and return to the PTT menu.
82-N8191-1EN.book Page 10 Tuesday, January 17, 2006 2:56 PM