Insert effect p.79, Solo/monitor p.84 – KORG DIGITAL RECORDING STUDIO D16 User Manual

Page 18

Advertising
background image

16

Refer to the D16 Owner’s Manual for details on 1–4.

5. Level................................ [99 Level, 8 Level, 1 Level]
Specifies the undo level. The data will be saved for the
specified number of previously-executed operations.
You can select the undo level from 99, 8, or 1 opera-
tions.

6. New .......................................................................
Scroll the list toward the newer data.

7. Old.........................................................................
Scroll the list toward the older data.

Some of the operations have been changed.

P1 InsASS: Insert effect insert

position/type setting

Refer to the “D16 Owner’s Manual” for details on 1, 2,
and 4.

3. InsertTo...................................................................
Selects the position at which the insert effect will be
inserted.
Press the “ ” button to access the dialog box, and
make settings. Press the “OK” button to finalize the set-
tings, or press the “Cancel” button to discard any
changes you made.

■

When “Assign” is set to “In”

Specifies the return channel.

3a. Input....................................... (In1...8, DrL, DrR)

This shows the analog inputs.

3b. Effect ....................................................... (1...8)

This shows the effect numbers.

3c. SelectCh .......................................... [1...16, Off]

This specifies the return channel of the effect out-
put.

■

When “Assign” is set to “Trk”

Specifies the channel into which the effect will be
inserted:

→

(effect)

→

(return=inserted channel).

3a. SelectCh .......................................... [1...16, Off]

Selects the mixer channel into which the effect will
be inserted.

If the “SelectEffType” is “2in2outx2,” only
odd-numbered channels can be selected for
“SelectCh.”

3b. Effect ....................................................... (1...8)

This shows the insert effect number.

3c. OutputCh......................................... [1...16, Off]

This shows the return channel of the effect output.
The same channel as “3a. SelectCh” will be shown.

“Rhythm Level” has been deleted from “P2 Monitor:
Monitor settings.”

Refer to the D16 Owner’s Manual for details on 1, 2,
and 4.

5. Rhythm ......................................................[On, Off]
Selects whether the internal rhythm sound will be sent
to the monitor LR bus or to the master LR bus.
On

: The internal rhythm sound will be sent to the mon-

itor LR bus. It will not be sent to the master LR bus.
Off

: The internal rhythm sound will be sent to the mas-

ter LR bus. It will not be sent to the monitor LR bus.

The volume of the internal rhythm is adjusted by
“RhythmVol” in the [TEMPO/RHYTHM] “Setup”
page.

19. INSERT EFFECT

p.79–

1

2

3

4

3a

3c

3b

21. SOLO/MONITOR

p.84

2

1

5

4

Advertising