Anti drip feature, Care and cleaning, When you have finished ironing – Kalorik USK DA 31750 User Manual

Page 8

Advertising
background image

Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.

Print only what is inside the frame.

8

USK DA 31750 - 110127


Assembly page 8/20






Fax +32 2 359 95 50

ANTI DRIP FEATURE


This iron is equipped with an anti drip feature that will protects fabrics
from water spotting even at low temperatures.


CARE AND CLEANING


• Clean the iron regularly according to the hardness of the water

and the frequency of use.

• Fill the water tank and put the thermostat in MAX position.
• Plug in the appliance. The pilot light will come on. Make sure the

steam dial is in "0" position. Put the iron in vertical position.

Never use vinegar or other liquids to descale the iron.
• As soon as the pilot light goes out, hold the iron over a sink and

press the cleaning button (6). Steam, water and dust particles will
come out of the soleplate.

• When the water tank is empty, release the cleaning button.

To clean the plastic parts of the iron when it has cooled down,
use a humid cloth.

To clean the soleplate, make sure you use a product made
especially for this purpose. Never use abrasive products.

WHEN YOU HAVE FINISHED IRONING


• Turn temperature dial to “MIN” and unplug iron from electrical

outlet.

• With soleplate facing away from you, turn iron upside down to

empty water.

• Then store the hot iron on its heel rest so that any remaining

moisture will evaporate. When the soleplate has cooled down,
you can store the iron.

Advertising