Kustom KXB200H/HR - Manual (Page 9)

Kustom ® KXB200H/HR Specifications
Output Power 200 Watts 4 Ohms at 5% THD+N
Input Impedance Dual Input 0 dB: 500K Ohm, -6dB: 95K Ohm
Gain 75 dB Gain and Master at Max, All EQ at 12 o’clock
S/N Ratio -80 dB typical Below rated power
DIrect Output Electronically Balanced
XLR Ground Lift Switch and Level control
Aux Input 800 mV Sensitivity Stereo 3.5mm High Impedance
Headphone Output 15 mW @ 30 ohms
per channel Stereo 3.5mm, 8 ohm minimum
Effects Loop 800 mV/1K Ohm output
impedance Effects Send, Gain and Master at 12
o’clock
800 mV/22K Ohm output
impedance Effects Return, Gain and Master at 12
o’clock
Amplifier Tone Controls 63 Hz +/- 12 dB
150 Hz +/- 12 dB
350 Hz +/- 12 dB
800 Hz +/- 12 dB
2 KHz +/- 12 dB
5 KHz +/- 12 dB
Power Requirements USA/Canada 120VAC/60Hz, 300W
Europe 230VAC/50Hz, 300W
UK 240VAC/50Hz, 300W
Australia 240VAC/50Hz, 300W
Japan 100VAC/50-60Hz, 300W
Dimensions/Weight
Head cm 3 /Kilogram 24.4 (Height) X 50.8 (Width) X 27.9 (Depth),
12.5 Kilogram
Inches/Pounds 9.6 (Height) X 20 (Width) X 11 (Depth),
27.6 Lbs
Dimensions/Weight
Rack Mount cm 3 /Kilogram 8.9 (Height) X 43.2 (Width) X 24.4 (Depth),
6.5 Kilogram
Inches/Pounds 3.5 (Height) X 17 (Width) X 9.6 (Depth),
14.3 Lbs
kustom.com