KITCHENAID KUDD03STBL - Manual (Page 7)

7
Prepare Cabinet Opening
1. To ensure minimum clearance dimensions exist:
■ Measure the distance from the cabinet countertop to the
cabinet floor and ensure 17" (43.2 cm) minimum height.
■ Measure the distance from the front of the cabinet to the
back wall and ensure 24" (61 cm) minimum depth.
■ Measure the distance from the left-hand side to the right-
hand side of opening and ensure 23½" (59.7 cm)
minimum width.
2. Drill 1½" (3.8 cm) diameter holes for drain and water hoses
and electrical wiring as shown. Holes should be placed
½" (1.3 cm) from back wall.
3. Install mounting brackets 17" (43.2 cm) from cabinet opening
floor using screws provided. If needed, drill
¹⁄₈" pilot holes in
cabinet.
Prepare Dishwasher
1. Measure cabinet opening height from floor to bottom of
countertop.
2. Place corner packaging on the floor and place dishwasher on
its back.
A. Choose left-hand or right-hand drain and water hose route.
B. Choose left-hand or right-hand electric wire route.
8"
(20.3 cm)
¹⁄₂ "
(1.3 cm)
17"
(43.2 cm)
Tip Over Hazard
Do not open dishwasher drawer until inside cabinet
opening.
Doing so can result in death or serious injury.
WARNING
WARNING
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.
17" (43 cm) Min.
18 ¹⁄₂ " (47 cm) Max.
23 ¹⁄₂ "
(59.7 cm)
24"
(61 cm)