Kenwood DNX5360M - Manual (Page 32)

32 DNX5360/DNX5360M/DDX5036/DDX5036M
Radio Listening
Source Control Screen
Switches to the source control screen to use
various functions.
Display the Source 1 Control Screen
See <How to Display the Source Control
Screen> (page 14).
Operation on the Source Control Screen 2
1 1 1
[FM] Switches to the FM1/2/3 band.
[AM] Switches to the AM band.
[TI] Turns the Traffic Information function On or
Off. (Type 2/3 models only)
See <Traffic Information>, (page 36).
[ 4], [¢] Tunes in a station.
Use the [SEEK] to change the frequency.
[List] Display the Tuner Preset List screen. See
<Preset Select> (page 33).
1 Information display
Selects the Program Service Name, Title &
Artist name, Station Name, Radio Text Plus,
or Radio Text.
"FM"/ "AM" Band display
"Preset" Preset number
"MHz"/ "kHz" Frequency display
[ ] When appears, the text display is
scrolled by touching it.
Various control screens appear in the Tuner Source mode.
• Set the remote controller mode switch to "AUD" mode before starting operation, see <Remote Controller mode switch>
(page 78).
Multi Function
[1/3] Switches the multi function display.
[
] Closes the multi function bar.
[ ] Opens the multi function bar.
[P1] – [P6] When [P1] to [P6] buttons appear,
you can recall the stations on memory.
For memory of broadcasting stations, see
<Auto Memory> (page 34) or <Manual
Memory> (page 34).
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display Setting
"AUTO1" Tunes in a station with good reception automatically.
"AUTO2" Tunes in stations in memory one after another.
"MANU" Switches to the next frequency manually.
[AME] Selects the Auto Memory mode.
See <Auto Memory> (page 34).
[PRE] Lists and selects memorized station.
[4Line]/ [2Line] Switches the number of lines
displayed in the Information Display.
[PTY] FM FM Searches station by program
type. (Type 2/3 models only)
See <Search by Program Type> (page 36).
[Mono]
FM FM
Selects the Monaural
reception. (Type 2/3 models only)
[CRSC]
FM FM
Turns the CRSC function On or
Off. (Type 4/6 models only)
[LO.S] Turns the Local Seek function On or Off.
(Type 2/3 models only)