Kenwood Z920DVD - Manual (Page 28)

— 28 —
English
Each time you press the FM or AM button, the adjustment mode
will be switched as follows:
"BAND- 1 f " / "BAND- 1 Gain " / "BAND- 1 Q " / "BAND- 2 f " / "BAND- 2
Gain " / "BAND- 2 Q " / "BAND- 3 f " / "BAND- 3 Gain " / "BAND- 3 Q " /
"BAND- 4 f " / "BAND- 4 Gain " / "BAND- 4 Q "
Adjusting the Centre Frequency:
Display and Setting:
"BAND- 1 f " : 60Hz/ 80Hz/ 100Hz/ 120Hz/ 160Hz/ 200Hz/ 250Hz
"BAND- 2 f " : 315Hz/ 400Hz/ 500Hz/ 630Hz/ 800Hz/ 1kHz
"BAND- 3 f " : 1.25kHz/ 1.6kHz/ 2kHz/ 2.5kHz/ 3.15kHz/ 4kHz
"BAND- 4 f " : 5kHz/ 6.3kHz/ 8kHz/ 10kHz/ 12.5kHz/ 16kHz
Adjusting the Gain:
Display and Setting:
"BAND- 1 Gain " : -12 – 0 – +12
"BAND- 2 Gain " : -12 –- 0 – +12
"BAND- 3 Gain " : -12 – 0 – +12
"BAND- 4 Gain " : -12 – 0 – +12
Adjusting the Quality Factor:
Display and Setting:
"BAND- 1 Q " : 0.25 / 0.50 / 1.00 / 2.00
"BAND- 2 Q " : 0.25 / 0.50 / 1.00 / 2.00
"BAND- 3 Q " : 0.25 / 0.50 / 1.00 / 2.00
"BAND- 4 Q " : 0.25 / 0.50 / 1.00 / 2.00
• Not available during the Dual zone system is on.
• There is no equalizer effect in the centre speaker and Sub
Woofer output.
NOTE
2.Parametric Equalizer
Display and Setting:
"POSITION ALL" / "POSITION F-LEFT" / "POSITION F-RIGHT" /
"POSITION F-ALL" / "POSITION R-ALL"
"POSITION ALL" : Centre of the passenger cabin
"POSITION F-LEFT" : Centred on the front left seat
"POSITION F-RIGHT" : Centred on the front right seat
"POSITION F-ALL" : Centred on the front seat
"POSITION R-ALL" : Centred on the rear seat
Not available during the Dual zone system is on.
NOTE
4.Selecting the Position Mode
Press the #1 - #3 button for at least two seconds.
Recalling your settings of the parametric equalizer
Press the #1 - #3 button for the desired the parametric equalizer
setting.
Not available during the Dual zone system is on.
NOTE
3.Storing Your Setting of the parametric equalizer
Audio effect control features
<When the KDS-P901 is connected>
Dolby Pro Logic is a technology developed by Dolby
Laboratories for the active decoding of Dolby Surround
encoded source.
Display and Setting:
"Dolby PL ON" / "Dolby PL OFF"
• Not available during the Dual zone system is on.
• You cannot operate Dolby Digital 5.1ch surround or DTS 5.1ch
surround DVD and DTS-CD are playing.
NOTE
5.Using the DOLBY PRO LOGIC