Kompernass KH4063 - Manual (Page 4)

- 4 -
KH 4063 / 4069 / 4070
Table lamp
1. Intended Use
This table lamp is meant to be used in
dry areas and indoors.
It is not intended for outdoor use and
not for use in commercial or industrial
areas.
2. Technical Data
Operating voltage : 220-240 V~, 50 Hz
Light bulb :
60 W - E27:
(Not included)
Maximum
power rating :
1 x 60 W
Protection class: II
3. Safety Instructions
To avoid life-threatening electric shocks:
• Only connect the table lamp to a
power socket with a line voltage of
220-240 V ~, 50 Hz.
• Do not bend or squeeze the power
cord.
• To disconnect, always pull out the
plug at the power socket, do not
pull at the power cord.
• Never use the table lamp in proximity
of water or in damp cellar areas.
Protect the table lamp from moisture
and dirt.
• Before cleaning, or if there is a power
supply fault, pull the plug out of the
power socket.
• If the power cord is damaged, have it
repaired by a qualified expert before
using the table lamp again.
To prevent fire hazards and the risk of
injury:
• Never touch the table lamp or the
lamp shade while it is switched on.
Make sure that the table lamp is
switched off and has cooled down,
before you touch it.
• While setting up the table lamp,
make sure that it is at a minimum
distance of 0.5 meters from illumi-
nated objects.
• Never cover the lamp shade, and
allow air to circulate freely around
and inside the table lamp.
• Always place the table lamp on an
even surface. Otherwise, it might
tip over and cause fire.
• Never leave the table lamp unsuper-
vised when in operation.
4. Operating elements
³ Fastening ring
· Lamp shade
» Lamp socket
¿ Power cord with cord switch