Kicker QS60.2 - Manual (Page 5)

5
WIRING
We recommend using 16 gauge (or larger) wire. The QS components are rated at 4 ohms and work
with any source unit or amplifi er designed to operate at a 4 ohm load. Make sure your source unit or
amplifi er is rated for 4 ohm operation.
Crossover in 2-way confi guration | One component set per channel
At least two amplifi er channels are needed for stereo operation (only one channel is shown) •
- IN +
OUT
-MID +
OUT
-TW +
-OUT +
+ -
+ -
+
-
+
-
+ - + -
- OUT +
- IN +
OUT
-MID +
OUT
-TW + - IN +
OUT
-MID +
OUT
-TW +
Crossover in 2-way confi guration | Two component sets per channel
Requires two complete QS systems (four woofers, four tweeters, four crossovers) •
At least two amplifi er channels are needed for stereo operation (only one channel is shown) •
Crossovers wired in series •
tweeter
crossover
woofer
source unit / amplifi er
source unit / amplifi er
2009 QS Multilingual h01.indd 5 2009 QS Multilingual h01.indd 5 11/21/2008 10:54:28 AM 11/21/2008 10:54:28 AM