Kramer Electronics VA-14 - Manual (Page 10)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Technical Specifications
8
5.2 Operating Your VA-14 4x1 Balanced Audio Mixer
On the VA-14xl 4x1 Balanced Audio Mixer unit, you can adjust the level:
From a specific 1 input, by rotating the appropriate LEVEL potentiometer
From all the inputs mixed together, by rotating each of the MASTER
potentiometers (1 and 2) respectively
At the headphone set, by rotating the PHONES LEVEL potentiometer
6 Technical Specifications
Table 4: Technical Specifications
2
of the VA-14 4x1 Balanced Audio Mixer
INPUTS: 4 balanced audio, Line or Mic, on female XLR connectors
OUTPUTS: 2 audio, balanced on a male XLR connector
One headphone output on a 6.5mm connector
MAX. OUTPUT LEVEL: Line: 20Vpp; Phones: 4.5Vpp; Mic: 300mVpp
BANDWIDTH (-3dB): > 40 kHz
S/N RATIO: Mic in, Phones Out: 45.3dB
Line In, Phones Out: 83.3dB
Line In, Line Out: 84.3dB
Mic In, Line Out: 64dB
CROSSTALK (all hostile): Mixed inputs
CONTROLS:
Line In, Line Out: <-57dB to -14.3dB
Mic In, Line Out; <0dB to 60.5dB
Line In, Phones Out: <-47dB to -18dB
Mic In, Phones Out: <0dB to 58.9dB
In level and master/phones level, min to max position for both
Line In, MIC OUT range: <-50dB to -25dB
Mic In, Mic Out range:<0dB to 21.6dB
Underside slide switches: inputs: Line/Mic and +48V phantom ON/OFF
Outputs: Line/Mic
COUPLING: In: AC; out: bal line/mic – DC; phones, AC
AUDIO THD + NOISE: Line In, Line Out: 0.007%; Mic In, Line Out: 0.15%
Line In, Phones Out: 0.085%
Mic In, Phones Out: 0.38%
AUDIO 2nd HARMONIC: Line In, Line Out: 0.001%; Mic In, Line Out: 0.005%
Line In, Phones Out: 0.009%; Mic In, Phones Out: 0.024%
POWER SOURCE: 12 V, 250mA DC
DIMENSIONS: 21.5cm x 16.2cm x 4.4cm (8.46" x 6.38" x 1.73"), W, D, H
WEIGHT: 1.4 kg. (3.1 lbs.) approx.
ACCESSORIES: Power supply
OPTIONS: 19" rack adapter
1 For example, rotating the LEVEL potentiometer 2 will adjust the volume generated to the speakers via the power amplifier
from the balanced audio source 2
2 Specifications are subject to change without notice